Overview
The Baer Brakes Pro Plus 4302248S is a 13-inch rear disc brake kit with a silver six-piston caliper. It is made for rear axles with GM 10/12 bolt small car pattern C-clip flanges and a 5 on 4.75 inch and 5 on 5 inch bolt pattern, and it is meant for wheels 17 inches or larger.
Rotors are two-piece, slotted and drilled, with a zinc-plated surface and an iron body on an aluminum hat. The one-piece park brake shoe assembly is housed in the backing plate that also mounts the caliper. Template Q110H is the one to compare against your wheel, because Baer cannot promise fit with every wheel style.
Key features
- Silver 6-piston caliper with stainless pistons and abutments
- Staggered piston layout to limit uneven pad wear
- Dual dust, weather and pressure seals
- Two-piece slot, drill and zinc-plated rotor with billet aluminum hat
- Backing plate with integrated park brake shoe assembly
- CNC machined from US-sourced forged or billet aluminum, powder coated finish
- Stainless braided hoses and hardware included
- Pad type D0731 (FMSI number)
Rotor size and wheel clearance
A 13-inch rotor is smaller than many rear kits, which can matter when the wheel is a tight fit. Measure the inside of the wheel and the space behind the spokes before ordering, and compare them against the wheel template. The minimum wheel diameter sets the lowest wheel size the kit is meant for, so a smaller wheel should not be used even if it bolts on.
Brake pads and rotors wear at different rates, and smaller rotors can heat up faster under repeated hard stops. Watch for pulsation, a soft pedal or uneven pad wear, and inspect the rotor surface for grooves or cracks at each service. Park brake cables wear over time, so inspect them whenever the rear brakes are opened up.
- Check inside wheel clearance against the rotor and caliper
- Replace pads in matched pairs on each axle
- Inspect rotor faces for grooves or heat cracks
- Confirm the wheel meets the 17.0 inch minimum
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302248S |
| UPC | 844165043027 |
| Rotor diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Caliper | 6-piston floating, silver |
| Pad type | FMSI D0731 |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included |
| Park brake cables | Not included |
| Axle flange | GM 10/12 bolt C-clip, small car pattern |
| Wheel bolt pattern | 5×4.75/5×5.00, 5 lug |
| Lug nuts | Not included |
| Minimum wheel diameter | 17.0 inch |
| Template | Q110H |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It is matched by axle: a GM 10/12 bolt small car pattern C-clip flange with a 5×4.75/5×5.00 wheel bolt pattern. Measure your axle housing against those specs before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors and hardware are pre-assembled, and the park brake depends on cables that are not part of this kit. Lug nuts are not included. Template Q110H is used to check wheel fit before mounting. Verify pedal firmness and park brake function in a clear area before public road use.
What’s included
The kit covers the 13-inch two-piece rotors, silver calipers, backing plates with park brake shoe assemblies, stainless braided hoses and stainless hardware.
Not included: park brake cables and lug nuts.















