Overview
The Baer Brakes Extreme Plus front brake system kit, part 4261017R, pairs a red 6S caliper with a 14-inch two-piece slotted, drilled rotor for 1997–2003 Ford F-150 4WD trucks. The caliper is a 1-piece Monoblock with 6 pistons, the rotor has a billet aluminum hat, and the kit is built around the D1247 pad type.
The kit covers 4WD Ford F-150 trucks from 1997 through 2003. Wheel style affects fit, so check the wheel with template N045P. The 14.0 inch rotor fits most wheels 18 inch or larger.
Key features
- Red-finished 6S caliper, 1-piece Monoblock design
- Made in Phoenix, AZ from CNC machined aluminum forging, US sourced
- Powder coated finish
- Stainless pistons, abutments and noise suppression clips
- Staggered piston layout helps reduce uneven pad wear
- Dual seals against dust, weather and pressure
- Two-piece rotor, slotted and drilled, zinc plated, with billet aluminum hat
Caliper finish and care
Powder coated calipers resist chips better than bare paint, but they can still scratch when wheels come off. Wipe away brake dust with a mild, non-acid cleaner instead of harsh solvents that can soften the coating over time.
Dual seals keep dust, water and pressure out of the piston bores, yet the seals wear over time. Check for fluid seepage around the piston area and any uneven pad wear that could point to a sticking slide. Keep the slide pins clean and lubricated with brake-rated grease when pads are changed.
Two-piece rotors need the same care as single piece rotors: keep the mounting face free of rust and check the hat for cracks at every service.
- Clean the caliper with a mild, non-acid cleaner
- Look for fluid seepage at piston seals
- Lubricate slide pins with brake grease when servicing
- Check the hat for cracks at each brake job
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261017R |
| UPC | 844165034766 |
| Kit type | Kit |
| Caliper | 6S, 1-piece Monoblock, 6 pistons, fixed type |
| Caliper color | Red |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 inch |
| Front rotor included | Yes |
| Lug nuts included | No |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.315 in |
| Minimum wheel diameter | 18.0 inch |
| Brake pad type | D1247 (FMSI) |
| Hoses | Re-uses OE hoses |
| Drive | 4WD |
| Axle | Front |
| Grade | Performance |
| Template | N045P |
| Country of origin | US |
Vehicle fitment
The manufacturer fitment list covers 4WD Ford F-150 trucks from 1997 through 2003.
Make sure your year, model and trim fall within this coverage before ordering.
Installation notes
Mounting brackets and hardware come with the kit, and the rotors are pre-assembled with stainless hardware. Template N045P helps confirm clearance for the wheel you intend to fit, since the 14-inch rotor fits most wheels 18 inch or larger. Brakes are safety-critical, so a qualified technician should verify the installation before driving.
What’s included
Included are the red 6S caliper, the two-piece front rotor, and the mounting brackets and hardware.
Not included: lug nuts.














