Overview
The Baer Brakes 4262325R is a red rear disc brake kit in the SS4 Plus series, made for Ford 9 inch rear ends fitted with Torino (Late Big) bearing housing ends. The package uses an 11.0 inch two-piece rotor clamped by a four-piston S4 caliper, with a 5 on 4.50 and 5 on 4.75 bolt circle. It is sized for wheels of 15 inch diameter and up, with a minimum wheel diameter of 15.0 inch.
Everything needed for the rear hub arrives in one kit: brackets, rotors with stainless hardware, and stainless braided hoses. A park brake is not part of the package, and lug nuts must be sourced separately. Baer will not vouch for fit with every wheel design, so compare the S125A template with your chosen wheel before buying.
Key features
- Four-piston S4 caliper with hard anodized aluminum pistons and stainless abutments
- Forged or billet aluminum parts, CNC machined in the US and finished in powder coat
- Dust, weather and pressure seals, with the dust and weather seals rated T compliant.
- Slotted, drilled, zinc-plated two-piece vented rotor on a billet aluminum hat
- Noise suppression clips and pre-assembled stainless hardware
- Braided stainless hoses, brackets and hardware are included
- Uses the DR1-C pad type
Pad and rotor maintenance
A rear disc kit wears most at the pad and rotor interface, so maintenance is largely about keeping that contact surface clean and even. Brake dust and road grit build up around the caliper and bracket, and periodic cleaning keeps the sliding parts moving freely and makes wear easier to see.
Rotor and pad replacement often happens together. Fresh pads on a worn or heat-cycled rotor can chatter or wear unevenly, so check rotor thickness and surface condition whenever the pads are replaced. Stainless hardware should be checked for tightness on the first few drives, since it holds the rotor assembly together.
- Clean caliper slides and bracket bolts at each pad change
- Replace pads and rotors as a matched pair when wear is uneven
- Watch for pulsing under braking as an early sign of rotor trouble
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262325R |
| UPC | 844165048930 |
| Caliper | S4, four-piston, fixed |
| Caliper color | Red |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.020 inch |
| Rotor construction | Vented, two-piece |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Pad FMSI number | DR1-C |
| Minimum wheel diameter | 15.0 inch |
| Lug count | 5 lug |
| Bolt pattern | 5×4.50/5×4.75 |
| Axle flange | Ford 9 inch Torino/Late Big bearing |
| Brake hose | Steel braided, DOT approved |
| Park brake | No |
| Lug nuts included | No |
| Sold as | Kit |
| Template | S125A |
| Country of origin | US |
Vehicle fitment
It is matched to the Ford 9 inch axle with Torino (Late Big) bearing housing ends. Confirm fit for your vehicle’s year, model and trim before ordering. Verify your housing ends and wheel clearance against the S125A template before purchase.
Small Bearing housing ends are a separate flange style and this kit does not cover them. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors come assembled with stainless hardware, so the job is mainly bracket, caliper and rotor mounting on the axle. With no park brake supplied, arrange a parking brake method separately if your vehicle needs one. Bleed the lines once the system is installed, then check pedal firmness before moving the vehicle.
What’s included
Red S4 rear brake calipers, two-piece rotors with NAS high grade stainless hardware pre-assembled, mounting brackets, stainless braided hoses and hardware.
Not included: lug nuts, park brake, front rotor.















