Overview
The Baer Brakes 05446-020 is a front brake rotor set for 1975–1993 Ford Bronco, F-100 and F-150 trucks with 4WD. Each rotor is a one-piece, full cast vented disc with a cross-drilled and slotted friction surface, made as a direct replacement for the factory front rotor on the listed applications.
Owners who want a steadier pedal and less fade on an older Ford 4×4 often start with a slotted and drilled rotor. The slots and holes on this set let gas and dust escape from between the pad and rotor during braking, which Baer says supports braking performance and a more consistent pedal. The zinc-plated finish gives the rotors a bright look when seen behind open-center wheels.
Key features
- Cross-drilled and slotted friction surface that lets gas and dust escape between pad and rotor
- Enhanced vane structure and premium materials for cooling and durability
- Premium, mill balanced, direct replacement rotor design
- Chamfered cross-drilled holes to minimize stress cracking
- Zinc-plated finish for a bright appearance in open-center wheels
- Rust resistant coating on the cast iron rotor
Before you buy
Older Ford 4×4 trucks often have rotors that have seen many seasons of road salt and moisture. Before fitting, inspect the hub face, the wheel studs and the tone ring already on the hub, since this kit does not include an ABS tone ring. A clean hub face helps the rotor sit flat and reduces runout that can cause pulsation. Plan the job on a level surface with the truck securely supported, and keep track of which side each rotor came from.
Pads should match the rotor and the way the truck is used. A slotted and drilled surface suits drivers who want consistent pedal feel, but it does not replace a sound pad, caliper or brake line. Replace worn components together where possible so the braking system wears evenly.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 05446-020 |
| UPC | 844165003830 |
| Sold as | Set (pair) |
| Rotor construction | One-piece, full cast |
| Axle | Front |
| Rotor type | Conventional, vented |
| Brake surface | Directional |
| Surface type | Slotted x drilled |
| Material | Cast iron |
| Disc finish | Zinc plated |
| Rust resistant coating | Yes |
| Grade type | Premium |
| Outside diameter (mm, in) | 298, 11.73 |
| Nominal thickness (in, mm) | 1.19, 30.2 |
| Discard thickness (mm, in) | 28.4, 1.12 |
| Center hole diameter (in, mm) | 3.88, 98.5 |
| Stud/lug hole circle diameter (mm, in) | 139.7, 5.5 |
| Stud/lug hole quantity | 5 |
| Overall height (in, mm) | 2.71, 68.8 |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | CN |
Vehicle fitment
The manufacturer fitment list covers these front-axle applications: 1976–1993 Ford Bronco (4WD), 1975–1976 Ford F-100 (4WD, rotor only) and 1976–1993 Ford F-150 (4WD, rotor only). Each entry is for the front axle of a four-wheel-drive truck.
They fit the front axle of 4WD Ford trucks from 1975 to 1993 only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Keep the existing tone ring on the hub and reuse it, since no ABS tone ring is included. The vented one-piece rotors have a nominal thickness of 1.19 in, so check pad and caliper clearance before assembly. Bed in new pads with the break-in steps that come with them.
What’s included
A pair of front Baer Claw rotors, sold as a set.
Not included: ABS tone ring.
















