Overview
The Baer Brakes 6920138 is a 2-piece replacement rotor ring, 13.000 inches in outside diameter and 1.100 inches thick, used in the TRACK+ system and certain Baer Pro Plus and other Baer Brake systems. It is the right-side, directional version with a slotted, drilled and zinc-plated finish.
The ring is cast iron and vented, with a premium casting and a curved vane design that helps cooling. It is dynamically balanced for smooth running. Rotors in this family are directional and sold individually, so a full axle needs a separate left ring.
Key features
- Two-piece rotor ring with a slotted, drilled and zinc-plated surface
- Curved vane pattern for cooling
- Directional surface built for the right side only
- Dynamically balanced for vibration-free performance
- Cast iron material with Performance grade type
Choosing a two-piece ring
A two-piece rotor separates the friction ring from the hat, so the attachment hardware and the hat’s condition matter as much as the ring itself. Corrosion on the hat or mounting surface can cause runout, which shows up as pedal pulsation. When replacing the ring, clean the mating surfaces and use the hardware called for by the assembly.
Ring replacement is often done when the braking surface wears unevenly or the finish corrodes, while the hat stays serviceable. Because the ring is directional, confirm which side you are working on before removing the old one. Keep left and right rings apart during the job so they are not mixed up on the bench, and keep the bolts sorted with the ring they came from.
- Clean the hat face and mounting holes before fitting
- Replace attachment hardware that shows stretching or corrosion
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920138 |
| UPC | 844165012238 |
| Axle side | Right |
| Outside diameter | 13.000 in |
| Nominal thickness | 1.100 in |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 8.5 in |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface finish | Slotted, drilled and zinc plated |
| Material | Cast iron |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | CN |
Vehicle fitment
Fits the TRACK+ system and certain Baer Pro Plus systems. Match it to your brake system’s bolt pattern and hub before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The ring is directional and side-specific, so the right-side ring belongs on the right hub only. Mount it so the directional surface follows the wheel’s forward rotation. Check the ring against the bolt pattern and hub before installation, since its 12 holes sit on an 8.5 inch circle.
What’s included
One right-side rotor ring, sold as Each.
Not included: Calipers, pads and the rest of the brake hardware are separate parts.













