Overview
The Baer Brakes 6919171 is a 1-piece, plain-surface replacement brake rotor for the left side. It is made for select Baer Brake systems. The rotor is directional, so install it only on the left side.
The full cast iron rotor is vented, with a curved vane design that aids cooling. Outside diameter is 13.57 in, nominal thickness is 1.1 in and overall height is 2.15 in. The 5-stud pattern measures 5.00 in and 4.50 in, with a 3.055 in center hole. Plain-surface rotors differ by surface type, so confirm the surface suits your replacement plan.
Key features
- Left-side directional rotor
- Plain surface type
- Curved vane design for cooling
- Full cast, 1-piece cast iron body
- Dynamically balanced for vibration-free performance.
- Purpose built castings made from premium materials
Before you buy
A brake rotor is the friction surface the pads clamp against, so its surface, thickness and balance all influence how the brakes feel. A plain surface relies on the pad compound to bed in and clean up over time, while slotted or drilled surfaces handle debris and heat differently. Pick the surface type that matches the pads and the driving you do, since the two work together.
Directional rotors must go on the correct side, so mark the side before removing the old rotor. Clean the hub face and remove any rust or old residue before mounting, because debris under the rotor can cause runout. Tighten wheel bolts to the torque range for your vehicle and recheck them after the first few drives.
Rotors and pads are often replaced together. Worn pads can leave a lip or uneven contact on a new rotor, so inspecting the calipers and brake hardware at the same time helps the new parts wear evenly.
- Measure the hub face for rust or buildup before fitting
- Inspect the old rotor for scoring, cracks and uneven wear
- Replace pads and check calipers at the same time as the rotor
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919171 |
| UPC | 90127961483 |
| Axle side | Left |
| Outside diameter | 13.57 in |
| Nominal thickness | 1.1 in |
| Overall height | 2.15 in |
| Center hole diameter | 3.055 in |
| Stud/lug hole circle diameter | 5.00 in and 4.50 in |
| Stud/lug quantity | 5 |
| Material | Cast iron |
| Construction | Full cast, 1 piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Plain |
| Grade type | Performance |
| ABS tone ring included | No |
| Drum in hat | No |
| Emission code | 6 |
| Package | Each |
| Country of origin | USA |
Vehicle fitment
Vehicle fitment is not confirmed for part number 6919171. It is intended for select Baer Brake systems, so confirm the hub, bolt pattern and center bore match your current Baer components.
No vehicle is confirmed for this rotor. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install only on the left side, because the rotor is directional. The package does not include an ABS tone ring, so check your existing hub hardware and sensor arrangement before fitting. Verify the 5-stud pattern and 3.055 in center bore first.
What’s included
A left replacement rotor, packaged as each.
Not included: ABS tone ring. Brake pads and calipers are separate parts and are not part of this package.
