Overview
The Baer Brakes Big Claw 2302037 is a pair of rear disc brake rotors for 2000–2006 GM 1500 2WD SUVs, including Chevrolet Suburban 1500, Chevrolet Tahoe and GMC Yukon models. Each rotor is a larger than stock diameter one-piece cast iron design, up to 2 inches larger on some applications, with directional cooling vanes.
The rotors pair with caliper relocation brackets that move the calipers outward, so OE pads and hardware can still be used.
Key features
- 14 inch outside diameter rotor
- Purpose-cast directional curved vanes for airflow
- Cross-drilled and slotted friction surface
- Zinc-plated finish that resists rust and corrosion
- Six mounting holes on a 5.5 inch bolt circle
- Bolts on directly with no brake bleeding required
- Limited 1 year warranty
Planning a rear rotor upgrade
Larger rotors change where the caliper sits relative to the hub, which is why relocation brackets matter. The caliper needs to clear the rotor and wheel with room for pad movement, and the mounting bolts need to seat fully. Before installing, check that the bracket set matches the caliper design and that the caliper slides freely on its pins.
Rear rotors wear with each stop, so check thickness, surface condition and runout at every pad replacement. Glazing, scoring or a lip at the edge means the rotor should be turned or replaced. Keep the brake fluid fresh and inspect the rear lines and hardware on the same schedule, since a worn rotor and a sticking caliper often appear together.
- Check caliper slide pins before installing
- Compare rotor thickness against the service minimum before reuse
- Use new hardware when brackets are installed
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2302037 |
| UPC | 844165047964 |
| Sold as | Set |
| Axle | Rear |
| Drive | 2WD |
| Construction | One piece, full cast |
| Material | Cast iron |
| Outside diameter | 14 inch |
| Inside diameter | 8.268 inch |
| Center hole diameter | 3.095 inch |
| Nominal thickness | 1.181 inch |
| Discard thickness | 1.081 inch |
| Overall height | 3.76 inch |
| Mounting bolt hole circle | 5.5 inch |
| Mounting bolt hole diameter | 0.65 inch |
| Mounting bolt holes | 6 |
| Surface type | Slotted x drilled |
| Vent design | Curved, vented |
| Finish | Zinc plated |
| Floating | Yes |
| ABS tone ring included | No |
| Grade | Performance |
| Warranty | Limited 1 year |
| Country of origin | US |
Vehicle fitment
It fits 2000–2006 Chevrolet Suburban 1500 in LS, LT and Z71 trims, 2000–2006 Chevrolet Tahoe in LS, LT, Limited and Z71 trims, and 2002–2006 GMC Yukon in SL, SLE and SLT trims.
It is for 2WD models with six lugs. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
It bolts on directly with no brake bleeding. The larger rotors need the calipers moved outward, so the relocation brackets are needed. Verify the bracket set matches your caliper before mounting, check wheel clearance with the template including the spare, and have a qualified technician check brake function after installation.
What’s included
A pair of rear rotors sold as a set, with a limited 1 year warranty.
Not included: the caliper relocation brackets that Baer describes as part of the full Big Claw kit.















