Overview
The Baer Brakes 6920259 is a right-side, 2-piece plain finish replacement brake rotor ring measuring 14 inches across, made for select Baer Brake systems. This vented cast iron ring is 1.25 inches thick and uses 12 mounting bolt holes.
A plain friction face keeps the surface simple, and the curved vane cooling layout with dynamic balancing supports steady braking and smooth running. Two-piece rotors separate the friction ring from the mounting hat, so the hub must present the same bolt spacing. For a ring like this, the bolt circle is the distance across the hole centers. The rotor is directional and fits the right side only.
Key features
- Two-piece construction with a separate friction ring
- Plain friction surface
- Curved vane cooling layout
- Dynamic balanced casting
- Vented, directional rotor
- Right side only
Before you buy
A plain friction face is a simple surface that is easy to inspect, since scoring, heat marks and uneven wear show clearly. Dynamic balancing and a curved vane layout are meant to keep the ring running smooth and cool under normal braking. On a two-piece ring, the friction ring and mounting hat are separate parts, so both should be checked for fit before the wheel goes back on.
Before buying a replacement ring, confirm that the hat and hardware you already have are compatible with it. Compare the outside diameter, thickness and hub spacing with the old components. Brake pads, calipers and hat hardware are separate purchases, and older hardware is often replaced during a rotor job to keep the braking system consistent.
- Compare the hat face against the ring before assembly
- Clean the hub and hat mating surfaces
- Replace pads when the friction material is worn thin
- Use new hardware where the old hardware shows stretch or rust
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920259 |
| UPC | 844165012306 |
| Material | Cast iron |
| Construction | Two piece |
| Outside diameter | 14 inches |
| Nominal thickness | 1.25 inches |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 8.5 inches |
| Rotor type | Vented |
| Surface type | Plain |
| Brake surface | Directional |
| Axle side | Right |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
The rotor is a replacement for select Baer Brake systems. Compare its 14-inch diameter, 1.25-inch thickness and 12 x 8.50-inch bolt pattern with your current components before fitting.
Installation notes
Right side only: the directional casting is made for one side of the vehicle. Mount the two-piece ring with the hat and hardware your hub requires, and remember the ABS tone ring is not included.
What’s included
One right-side two-piece plain rotor ring, sold individually.
Not included: A hat, pads and calipers must be sourced separately.
