Overview
The Baer Brakes 4261636HO-2 is a front 6T brake system kit for the 2010 to 2026 Ford F-150, including the Raptor, in Hugger Orange. It combines a 6-piston caliper, a 13.5 inch vented rotor, D1247 pads and braided hoses for owners of 2WD and 4WD trucks who want a larger front brake setup.
The kit is made in Phoenix, Arizona, from CNC machined forged or billet aluminum. The calipers are powder coated, and the rotor is slotted and zinc plated. Wheel styles vary, so compare the O080M template with the wheel you plan to run.
Key features
- Six-piston, fixed direct-mount caliper with staggered pistons to help pads wear evenly
- Stainless steel pistons, abutments and noise suppression clips
- One-piece vented rotor at 13.5 inches, slotted with a zinc-plated surface
- Dual seals guard against dust, weather and pressure
- Curved vane rotor design intended for cooling and reduced brake fade
- Powder coated Hugger Orange finish on the caliper
- Mounting brackets, hardware and braided hoses included
Before you buy
A larger front brake kit changes more than stopping power. The bigger rotor and multi-piston caliper take up more space behind the wheel, so clearance between the caliper and the wheel spokes should be checked before any parts are ordered. Wheel offset and backspacing matter as much as diameter, and a wheel that cleared stock brakes may not clear a larger setup. Front brake changes also alter the loads the hubs carry, so worn ball joints and wheel bearings are worth inspecting first.
Pads and rotors are usually replaced together, since a new rotor needs pads that bed in against it. Brake fluid should be fresh when the system is opened, and the lines should be bled once the new hoses are installed. Plan a short test drive in a clear area to bed the pads before towing or loaded driving.
- Check caliper clearance against the wheel before ordering
- Inspect ball joints and wheel bearings during installation
- Replace pads and rotors together for even wear
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261636HO-2 |
| UPC | 90127970287 |
| Caliper designation | 6T |
| Caliper type | Fixed, direct mount |
| Piston quantity | 6 |
| Caliper color | Hugger Orange |
| Rotor outside diameter | 13.5 in |
| Rotor construction | Vented, 1-piece |
| Rotor surface | Slotted and zinc plated |
| Rotor thickness | 1.25 |
| Minimum wheel diameter | 17.0 in |
| Pad type | D1247 (FMSI) |
| Friction material | Semi-metallic |
| Hose material | Steel braided |
| Hose DOT approved | Yes |
| Lug count | 6 |
| Wheel bolt pattern | 6×5.312 in |
| Template | O080M |
| Drive | 2WD, 4WD |
| Grade | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Kit |
Vehicle fitment
It fits the 2010 to 2026 Ford F-150 under the Ford F150 10-26 application. It covers 2WD and 4WD trucks, including the Raptor, and fits the front axle only.
It does not cover earlier F-150 generations or other Ford models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hoses supplied are for stock height trucks, so lifted vehicles may need longer hoses. Measure your setup before ordering.
Mounting brackets and hardware come with the kit. Because wheel fit can vary, test the O080M template against the wheel before final assembly.
What’s included
The kit includes the 6T front caliper, 13.5 inch vented rotor, D1247 pads, all mounting brackets, stainless braided hoses and hardware.
