Overview
The Baer Brakes 4262698C is a dual rear drag brake kit for Ford 8.8 inch rear axles, built with four 4-piston S4 calipers and two 11 inch slotted, drilled, zinc-plated rotors. Baer builds it for heavy, fast cars that may also see street use, and it is sized for wheels 15 inch and larger.
It is a dual rear drag brake kit built for heavy, fast vehicles that may also see street use, and it is scaled to fit wheels 15 inch and larger. It uses DR1 or HB100 pad types and comes with high friction pads for drag race applications. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Four 4-piston S4 calipers with 1.75 inch pistons, hard anodized aluminum pistons and stainless steel abutments.
- Two-piece slotted, drilled, zinc-plated rotors on billet aluminum hats drilled for 5/8 inch wheel studs.
- Noise suppression clips and dust and weather seals that Baer describes as T compliant.
- Powder coated clear caliper finish, manufactured in Phoenix, Az.
- High friction pads designed for drag race applications, with DR1 or HB100 pad types.
- Designed for wheels 15 inch and larger, with a minimum wheel diameter of 15.0 inch.
Before you buy
Drag brakes work hard in a different way than street brakes. Repeated hard stops from high speed push heat into the rotors, calipers and pads, so the friction material and fluid need to handle that load without fading. Matching the pad compound to how the car is used, whether mostly strip runs or a mix of street and track, is one of the first decisions to make.
A rear kit like this is only part of the braking picture. Hoses, master cylinder capacity and the proportioning setup all affect how the rear axle behaves under load, and many builders replace the lines at the same time as the calipers. Fresh brake fluid with a high boiling point helps limit fade during repeated runs, and it should be changed on a regular schedule.
- Plan hose replacement during the same install
- Check master cylinder size against the added caliper volume
- Use fresh brake fluid before the first run
- Inspect pad wear after every event
- Bed pads in gradually before hard use
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262698C |
| UPC | 844165050735 |
| Sold as | Kit |
| Caliper | S4, 4-piston, fixed |
| Caliper color | Clear |
| Piston size | 1.75 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor construction | 2-piece, vented |
| Rotor thickness | 1.02 |
| Rotor material | Iron with aluminum hat |
| Surface | Slotted, drilled and zinc plated |
| Friction material | Semi-metallic |
| Pad FMSI number | DR1 |
| Template | S125A |
| Axle flange | Ford 8.8 inch |
| Axle standoff | 2.5 inch |
| Lug count | 4 lug |
| Wheel bolt pattern | 4×4.25 inch |
| Minimum wheel diameter | 15.0 inch |
| Grade | Performance |
| Park brake | Not included |
| Brake hoses | Not included |
| Lug nuts | Not included |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
It is built for Ford 8.8 inch rear axle flanges that have C-clip eliminators and a 2.5 inch axle standoff. Confirm your vehicle’s year, model and trim before ordering.
The kit will not work with C-clip axles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Axles must already have C-clip eliminators, because the kit will not work with C-clip axles.
- Rotors arrive pre-assembled with NAS high grade stainless hardware, and mounting hardware is included.
- Brake hoses are not included, so supply hoses before the calipers are mounted.
Have a qualified technician check the finished brake installation before the first drag run.
What’s included
Four S4 calipers, two-piece slotted, drilled rotors pre-assembled with stainless hardware, high friction drag race pads, and mounting hardware.
Not included: brake hoses, lug nuts and the park brake assembly.















