Overview
The Baer Brakes 4262094R is a red Extreme Plus rear brake kit built for Ford 8 Inch and 9 Inch rear axles with small bearing housing ends and a 5×5.00 bolt pattern. A 1-piece monoblock 6-piston, 6S caliper in red clamps a 14.0 inch, 2-piece slotted and drilled rotor, giving a rear disc setup with an integrated park brake. Baer grades this kit as Performance.
The backing plate carries the caliper and also holds a modern 1-piece park brake shoe assembly, so one plate handles both jobs. The rotor comes pre-assembled with NAS high grade stainless hardware, and stainless braided hoses are included. Park brake cables are sold separately. Wheel fit is not guaranteed across every wheel style, so compare template N085P to the wheel you plan to use.
Key features
- Red caliper color on a 1-piece monoblock, 6-piston 6S design
- Caliper machined from US-sourced 2618 aluminum forging
- Stainless pistons, abutments and noise suppression clips
- Staggered piston layout reduces uneven pad wear
- Dual dust, weather and pressure seals
- Slotted, drilled, zinc-plated 2-piece rotor with billet aluminum hat
- Park brake shoe assembly built into the backing plate
- Pads matched by D1247 FMSI pad type
Pad and rotor wear
Slotted and drilled rotors show wear differently from plain ones. The slots help clear debris and gas from the pad face, but they also collect dust and can gradually reduce pad life if the surface is not kept clean. Inspect the rotor face for cracks or heavy grooves at each pad change, and replace it if the surface has lost its even finish.
The red caliper is built to be serviced rather than thrown away. Keep the dust seals free of grit when the pads are changed, and look for fluid seepage around the pistons. Early attention to a leaking seal protects the rest of the caliper assembly.
- Clean rotor slots when changing pads
- Inspect seals for dust and seepage
- Check the park brake shoe lining at the same time
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262094R |
| UPC | 844165035855 |
| Sold as | Kit |
| Axle flange | Ford 8 Inch/9 Inch Small Bearing |
| Wheel bolt pattern | 5×5.00, 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Caliper | 1-piece monoblock, 6-piston, 6S |
| Caliper color | Red |
| Caliper material | CNC machined from US-sourced 2618 aluminum forging |
| Pad type | D1247 (FMSI) |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | 2-piece, vented |
| Rotor thickness | 1.25 |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Hose material | Stainless steel |
| Park brake | Included; cables not included |
| Grade | Performance |
| Template | N085P |
| Country of origin | US |
Vehicle fitment
The kit is made for Ford 8 Inch/9 Inch rear axles with small bearing flanges, a 5×5.00 bolt pattern and a minimum wheel diameter of 18.0 inch. Match those measurements to your rear end before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two items sit outside the box: park brake cables and lug nuts. The pre-assembled rotors and stainless hoses are included. Use template N085P to verify wheel clearance against the 18.0 inch minimum. Rear brake and park brake hardware should be installed by a technician comfortable with hydraulic work.
What’s included
A red 6-piston 6S monoblock caliper, 14.0 inch 2-piece slotted and drilled rotors with pre-assembled stainless hardware, a park brake shoe assembly in the backing plate, and stainless braided hoses and hardware.
Not included: Park brake cables, lug nuts and front rotor.















