Overview
The Baer Brakes 4402000B is a 12-inch rear SS4 brake system with black calipers for 2007–2018 Jeep Wrangler models. The kit swaps the rear brakes for a four-piston S4 caliper clamping a drilled and slotted rotor.
The S4 caliper clamps a 12.44-inch, one-piece, slotted, drilled and zinc-plated non-vented rotor. The caliper has dust and weather seals and uses DR41 or HB540 pads. Verislide caliper brackets are included.
Key features
- Rear 12-inch SS4 brake system for 2007–2018 Jeep Wrangler
- S4 four-piston caliper with black finish
- 12.44-inch one-piece drilled, slotted and zinc-plated rotor
- Non-vented rotor
- Dust and weather seals on the caliper
- Uses DR41 or HB540 pad type
- Verislide caliper bracket design
- Brackets and mounting hardware included
Rear brake upgrade considerations
A larger rear rotor and caliper change how the brakes share work with the front, so the rear brakes should be considered as part of the whole system. Bigger rear brakes can help stop a loaded vehicle more evenly, but only when the fluid, lines and pads are in good condition.
Brake fluid should be fresh when a big brake kit is installed, and the brake lines should be checked for flex or wear. Bleed the system thoroughly after installation and test the pedal feel at low speed before driving on public roads.
- Replace old brake fluid before or during installation
- Check brake lines for wear or flex
- Bed in new pads with gentle stops
- Inspect rotors and pads at each service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4402000B |
| Part type | Rear big brake kit |
| Position | Rear |
| Caliper | S4, 4-piston, black |
| Caliper type | Aftermarket |
| Rotor diameter | 12.44 inch |
| Rotor type | Drilled and slotted, 1-piece, zinc plated, non-vented |
| Pad type | DR41 or HB540 |
| Wheel clearance | Most 16-inch or larger wheels |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler.
Wranglers built before 2007 are not covered. The system fits most 16-inch or larger wheels, so check wheel clearance. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
All brackets and mounting hardware are included. Because the system replaces rear brake components, have a technician confirm the result before the Jeep is driven.
What’s included
S4 calipers, rotors, caliper brackets with Verislide design and all mounting hardware.
Not included: Brake pads; the calipers use the DR41 or HB540 pad type.









