Overview
The Bilstein B8 5112 for the Ram 2500 is a front suspension leveling kit, part number 46-241641, built to add ground clearance, allow larger tires and increase wheel travel. The kit bolts into factory mounting locations with no modifications. It fits 2014–2018 Ram 2500 trucks.
The kit contains two B8 5100 shock absorbers and two oil springs. The shocks have a 46mm ID smooth body with a non-coilover design, a monotube internal design, no reservoir and an included boot that supports a smooth, stable ride on and off road.
Key features
- Lifts the front end for more ground clearance and wheel travel
- Allows larger tires while keeping the factory mounting locations
- 46mm ID smooth body, non-coilover shock design
- Monotube internal design with a boot included
- Zinc plated finish
- Direct fit with no modifications described
Choosing a front leveling setup
A front leveling kit raises the front end so the truck sits closer to level with the rear. On a heavy-duty truck that often matters when the rear carries a load, a camper or a trailer hitch setup, since the front can look low. Raising the front also changes steering geometry, so the wheel alignment should be checked once the kit is in place.
Before buying, measure the current height at the front and rear and decide how much change you want. Larger tires need the extra travel and clearance a kit like this provides, but brake hoses, steering linkage and the driveline should be checked for clearance at full compression and full steering lock.
Check the old parts for wear before installing. Worn ball joints, tie rod ends and bushings are often replaced at the same time, since the new geometry places more load on them. Re-check all fasteners after the first few drives and look at the shocks for leaks now and then.
- Measure ride height at all four corners before and after install
- Check brake hose length after the front end rises
- Inspect ball joints and tie rod ends while the front is apart
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 46-241641 |
| UPC | 651860747071 |
| Position | Front |
| Included | (2) B8 5100 shock absorbers, (2) oil springs |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Monotube |
| Reservoir | No |
| Boot included | Yes |
| Finish | Zinc plated |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2014–2018 Ram 2500 trucks in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, SLT and Tradesman trims. Ram 3500 and other Ram models are not covered. Check the model year on your truck against the 2014 and 2015 entries before ordering.
Ram 3500 and other Ram models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Raising the front end shifts caster and camber, so an alignment check after installation is worthwhile.
What’s included
Two B8 5100 shock absorbers and two oil springs.









