Overview
The Auburn Gear 504102 is a limited slip friction additive, a clutch treatment for limited slip differentials. Auburn Gear recommends it for all Auburn limited slip differentials to keep the clutch operating smoothly and extend service life. It is added to the differential oil rather than installed as a part.
A friction modifier of this type is used in limited slip differentials that have clutch packs. The product is not tied to a vehicle or axle fitment.
Key features
- Friction modifier for smoother clutch operation
- Reduces noise and ratcheting around corners
- Suitable for all types of limited slip differentials.
- For synthetic and mineral based oils
- Use 3 ounces per 1 quart of oil
Clutch care and oil changes
A friction modifier works inside the differential oil, coating the clutch plates so they engage smoothly instead of grabbing. This matters most in limited slip units with clutch packs, where a dry or worn clutch can cause chatter during tight turns. The additive does not replace worn clutch plates, so it is best used as part of regular care.
Add the additive when the gear oil is changed, after measuring it carefully against the oil volume. Mix it in thoroughly before driving, and use the oil type that suits the differential. Watch for leaks at the cover and pinion seal, because low fluid makes any clutch wear more noticeable.
- Measure before pouring
- Choose synthetic or mineral oil to match the differential
- Recheck fluid level after the first drive
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 504102 |
| UPC | 814996005020 |
| Additive type | Friction modifier |
| Mixing rate | 3 ounces per 1 quart of oil |
| Oil compatibility | Synthetic and mineral based oils |
| Bottle size | 6 oz. bottle comes with each Auburn unit |
Vehicle fitment
Fitment is not vehicle specific. The additive is used with Auburn Gear limited slip differentials, and no vehicle year, model or trim is named.
Check the oil and mixing rate for your differential before use.
Installation notes
Measure the additive at 3 ounces per 1 quart of oil and add it to the differential oil.
What’s included
Each Auburn unit comes with a 6 oz. bottle of this additive.








