Overview
The ICON Vehicle Dynamics Lower Control Arm Skid Plate System, part number 56101, is a bolt-on skid system for the lower control arms of the 2005 to 2023 Toyota Tacoma. It protects the lower arms in on-road and off-road use, with the skid plates sliding over rocks and debris to help prevent trip-ending damage.
The plates are made from 3/16-inch laser cut steel with a black powder coat finish and are supplied as a pair. The system also acts as the locator for the lower shock mount for ICON’s S2 Modular Performance Shock System, so the skid plates can be installed now and the shock added later.
Key features
- Protects the lower control arms from rocks and debris
- Bolt-on design for the Tacoma
- Made from 3/16-inch laser cut steel
- Black powder coat finish
- Locates the lower shock mount for the S2 Modular Performance Shock System
- Supplied as a pair
Skid plates and future shock upgrades
Lower control arms sit low and take hits from rocks, roots and ledges during off-road use. Skid plates keep those strikes off the arm itself, and a plate that slides over an obstacle is less likely to snag and hang up. A bent arm can change alignment and wear tires quickly, so protecting the arms helps keep the suspension geometry where it should be.
If a shock upgrade is planned, check how the skid system is mounted, since the lower shock location is set by the plates. Install the plates with the hardware kept tight, and recheck the bolts after the first few trail runs. Look over the black powder coat for scratches and touch up any bare spots to slow rust on the steel.
- Check bolts after the first few trail runs
- Inspect the arms for bends after hard impacts
- Touch up scratches on the black powder coat
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 56101 |
| UPC | 700006853751 |
| Material | 3/16-inch laser cut steel |
| Finish | Black powder coat |
| Type | Control arm skid |
| Quantity | Pair |
| Installation | Bolt-on, no cutting or drilling required |
Vehicle fitment
It fits the Toyota Tacoma from 2005 through 2023, and the Tacoma is the only vehicle it is made for.
The shock mount locating function is tied to the S2 Modular Performance Shock System, which is a separate purchase. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both plates belong to one bolt-on system, so install the set together for both sides of the vehicle. Because the system also locates the lower shock mount for the S2 system, the mounting position is set by the kit, so a later shock upgrade lines up with it.
What’s included
A pair of lower control arm skid plates forming the bolt-on skid system, black powder coated.
Not included: the S2 Modular Performance Shock System, which the skid plates are built to locate.





