Overview
The Smittybilt XRC Transmission Skid Plate, part number 76922 in black, protects the transmission area of a Jeep when wheeling off road. It is designed to guard essential components on the trail.
Each plate is cut from thick 3/16-inch steel to take hard hits on the trail. The plate is precision laser cut for a fit and mounts to the Jeep frame using the factory hardware, so no cutting or drilling is needed for the bolt-on installation.
Smittybilt recommends at least a 2.5-inch lift to allow optimal clearance when off-roading and needing a lot of articulation.
Key features
- 3/16-inch steel plate
- Precision laser cut for a fit
- Bolts to the Jeep frame with factory hardware
- No cutting or drilling required
- Black powder coat finish
- At least a 2.5-inch lift recommended for clearance and articulation
- Quality hardware is included.
Skid plates and trail damage
A transmission skid plate takes the hits that would otherwise reach the pan, fluid lines and mounts. Rocks, logs and ledges can strike the lowest part of the drivetrain at any speed, so the plate is the first line of protection. Plates perform well when the mounting points are sound, so inspect the bolts and frame brackets after each trip that involved heavy contact.
Steel plates add weight low in the vehicle, which is a trade-off worth weighing on a daily driver. Check that the plate clears the exhaust, crossmember and steering components at full articulation. If you add a larger lift or heavier tires later, recheck clearance, since the plate may need to be remeasured against the new geometry. Keep the black powder coat intact by touching up chips on bare metal before rust starts.
- Inspect bolts after each heavy trail day
- Touch up chips in the powder coat
- Check exhaust and crossmember clearance at full articulation
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76922 |
| UPC | 631410128369 |
| Product type | Transmission skid plate |
| Material | 3/16-inch steel |
| Finish | Black powder coat |
| Installation | Bolt-on with factory hardware |
| Drilling | None required |
| Lift recommended | At least 2.5-inch |
| Fit type | Direct fit. |
Vehicle fitment
It mounts to the Jeep frame with factory hardware. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plate bolts on with factory hardware and needs no cutting or drilling. At least a 2.5-inch lift is recommended for clearance when articulating a lot.
What’s included
The skid plate comes with quality hardware for a bolt-on installation.


















