Overview
The ARB RD90 is a reverse air locking differential for the Toyota Tacoma 7.5 inch front axle, with 27 splines. Air pressure locks both axle shafts together, so the open differential works as a full spool that supplies power to both wheels when grip is limited.
The RD90 is a reverse air locker and a selectable unit, so the driver chooses when it engages. Air comes from an ARB onboard compressor, sold separately. Fit is set by axle size and spline count, so compare the 7.5 inch front axle and 27 spline count with your build.
Key features
- Pneumatic air locking of both axles
- Full spool operation for equal drive to both wheels
- Selectable locker type
- 27 spline axle fit
- 7.5 inch axle size for the Toyota Tacoma.
Tacoma front axle upgrade planning
A front locker on a Tacoma is usually part of a broader axle upgrade. The locker changes how the front wheels share torque, so tires, steering and the front axle joints all feel the difference. Drivers often find the vehicle tracks straighter through rough sections, but the front end can feel stiff on dry pavement when the locker stays engaged.
Plan the work around the front differential service, since the cover, gasket, pinion seal and carrier bearings are commonly inspected at the same time. Check the front CV boots and the wheel bearings for wear before the install. Keep the air line clear of the steering linkage and the driveshaft, and recheck its routing after the first few trail outings.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD90 |
| UPC | 837290004827 |
| Locker type | Pneumatic, selectable, reverse (per title) |
| Axle manufacturer | Toyota |
| Axle type | Toyota Tacoma |
| Axle size | 7.5 Inch |
| Axle location | Front |
| Axle spline count | 27 splines |
Vehicle fitment
The RD90 fits the Toyota Tacoma 7.5 inch front axle with 27 splines. A locker must match the axle size and spline count, so confirm both before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the axle size and spline count before ordering, since a locker is an axle-level component. Installation requires an axle teardown, so a qualified shop should handle it and route the air line clear of the steering and driveline.
What’s included
Not included: An ARB onboard air compressor, which is needed to run the locker, is a separate purchase.








