Overview
The ARB RD216 is a rear selectable locker for GM 8.875 inch axles with 30 splines. The carrier configuration needs checking, because the 10 bolt and 12 bolt designations conflict. Confirm the locker type and carrier before ordering.
The RD216 is an electronic locker that shifts with a push button and runs on 12 volt power, with no air lines. Confirm the locker type and carrier before ordering.
Key features
- Electronic push-button selection
- Needs 12 volt power only, with no air lines
- 30-spline count
- Rear axle location
- Selectable locker design
Electronic locker considerations
A selectable locker only locks the axle when the driver asks for it, so the rest of the time the differential works as normal. An electronic unit replaces the air supply with a switch and a power feed, which makes the wiring and switch location the main planning steps. Plan a route for the harness that keeps it clear of suspension travel, heat sources and the driveshaft.
Before buying, confirm the carrier matches the axle, since the carrier and gear ratio decide whether the locker can be fitted at all. Choosing a switch position that is easy to reach on the trail helps avoid accidental engagement on pavement. Many owners also replace the axle seals and pinion components while the carrier is out, because the work is largely the same.
After installation, test the lock on a low-traction surface at low speed and listen for any grinding. Check the wiring connections and fuse periodically, especially after rough trails, and look for chafing where the harness passes through the body.
- Check the harness for chafing after rough trails
- Test engagement on low-traction ground at low speed
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD216 |
| UPC | 9332018026163 |
| Axle manufacturer | GM |
| Axle type | GM 12 Bolt 8.875 Inches |
| Axle location | Rear |
| Axle spline | 30 splines |
| Differential type | Selectable locker |
| Power | 12 volt |
| Configuration (from title) | 10 bolt |
Vehicle fitment
The GM 8.875 inch axle size is named, but the 10 bolt and 12 bolt configurations conflict, so verify the carrier. No vehicle is named with years, so none is assumed here.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the 12 volt feed through a fuse, as with any electrical accessory. Electronic lockers still involve carrier removal, so a skilled axle shop is the practical route. Check the control and wiring against your installation before starting.
What’s included
No included items are stated.
Not included: Power feed and control hardware: check against your installation before starting.







