Overview
The ARB RD165 is a 32 spline Dana 60 air locking differential with 4.10 down gearing. Air pressure engages the selectable locker and turns the open axle into a full spool that sends power to both wheels. It is made for front or rear Dana 60 axles.
Use the RD165 where traction is the limiting factor, such as steep climbs, loose surfaces and uneven ground. Compare the spline count and gearing to your current axle, since a 4.10 down ratio is a different setup from the 4.56 up versions in this family.
Key features
- Air operated selectable locker
- Full spool action for both wheels
- Built for 32 spline axles
- Listed gearing: 4.10 down
- Axle location: front or rear
- Requires an ARB onboard air compressor to activate
Setting up the air supply
An air locker needs a dependable supply before it can do anything. The compressor, any air tank, the switch and the line to the differential form one system, and a leak anywhere in it can stop the locker from engaging. Route the line away from exhaust, moving parts and sharp edges, and use fittings suited to the pressure the compressor produces. Test the system on flat ground before the vehicle goes into rough terrain.
Gearing and spline count shape how the axle behaves. A locked axle changes how the drivetrain feels at low speed, so drive on pavement after installation to get used to the change. Because the lock sends equal drive to both wheels, the shafts, U-joints and carrier see more load when engaged. Check for leaks at the carrier cover after the first trail outings.
- Check air line clamps before each trip
- Disengage the locker on pavement
- Inspect the carrier cover seal for seepage
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD165 |
| UPC | 9332018004208 |
| Differential type | Selectable air locker |
| Axle manufacturer | Dana |
| Axle type | Dana 60 |
| Axle spline count | 32 splines |
| Gear ratio | 4.10 down |
| Axle location | Front|Rear |
Vehicle fitment
The RD165 is matched to the axle itself: the Dana 60 housing, 32 spline count and 4.10 down gearing. Confirm fit for your vehicle’s year, model and trim before ordering.
A locker with a different spline count or gear ratio will not match these details. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the compressor and air supply before the axle is opened, since the locker cannot be tested without them. Carrier and gear setup after installation should be done by an experienced axle technician.
What’s included
Included: the RD165 air locking differential.
Not included: The ARB onboard air compressor, which is needed to activate the locker.








