Overview
The Rough Country MLC-6 Multiple Light Controller Upper Dash Kit, part number 70963, is a power distribution and switch system for Jeep Wrangler JL and Jeep Gladiator vehicles. It lets the driver control up to six auxiliary LED lights or electrical devices from switches on the dash.
The MLC-6 is a power distribution system and switchboard with a 6-row switch hub, a power distribution block, mounting hardware and high-temperature, abrasion resistant wiring cables. The kit mounts in the upper dash and installs without cutting the dashboard or splicing into factory wiring.
The kit installs without cutting the dash or splicing into factory wiring. It connects up to six devices to its switches.
Key features
- Six-row switch hub for six devices
- Power distribution block with 12-position terminal block
- Six plug-in style 40-amp cube relays
- Six ATO style 30-amp fuses
- Low-voltage cut-off circuit that cuts each accessory when battery voltage falls below operating voltage
- Plug-and-play design with an in-line fused relay
Wiring a switch hub
A switch hub gives the driver one panel for several accessories, but every switch is only as good as the wiring behind it. Plan the load for each circuit before connecting, and keep the total draw of the lights and devices within what the relays and fuses can carry. Mixed loads, such as a light bar and a winch, are better split across separate channels.
Terminal blocks are a common point of corrosion and loose connections in dash wiring. Crimp terminals firmly, keep the cables clear of the heater ducts and pedals, and check the connections after the first few weeks of use. A loose connection can cause a switch to cut out or a light to flicker.
- Label each switch clearly on the panel
- Keep relay cables away from pedal travel
- Check fuse ratings against each device
- Recheck terminals after rough trails
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 70963 |
| Mount | Upper dash |
| Switch hub | 6-row, six switches |
| Terminal block | 12-position |
| Relays | Six plug-in style 40-amp cube relays |
| Fuses | Six ATO style 30-amp |
| Wiring | High-temperature, abrasion resistant cables |
| Low-voltage cut-off | Included |
Vehicle fitment
The kit fits the 2018–2026 Jeep Wrangler JL in two-door and four-door body styles, and the 2020–2026 Jeep Gladiator. It is not made for earlier Wrangler generations or other Jeep models, so confirm the year and model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
LVCO stands for low-voltage cut-off. It turns off accessories when the battery drops below the voltage needed to start the engine.
Installation notes
The system is plug-and-play and uses an in-line fused relay, so the power distribution block and switch hub are the main parts to place. The kit avoids splicing into factory wiring, and the low-voltage cut-off protects the battery from accessory drain.
What’s included
MLC-6 power distribution block, 6-row switch hub, six 40-amp cube relays, six 30-amp fuses, a 12-position terminal block, mounting hardware and wiring cables.















