Overview
The ARB OMEGS1 is a greaseable rear shackle and pin kit by ARB 4×4 Accessories, identified by part number OMEGS1. The bolt-together build is meant to prevent out-of-angle shackle pin trouble at the side plate. It is a direct fit part, and confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Greaseable shackle pins
- Easy bolt-together assembly
- Greasing is handled through two outlet holes on every pin
- Rear position for part number OMEGS1
Keeping shackle pins serviceable
Rear shackles carry the weight of the axle and pivot as the suspension flexes, so the pins take repeated load at both ends. When a pin binds or wears unevenly, the shackle can shift out of line and put extra stress on the side plate. A greaseable pin gives lubricant a path to the wear surfaces, which helps slow wear when the vehicle sees mud, water and dust on the trail.
When replacing worn parts, inspect the pin bores, bushings and side plates together rather than one piece at a time. Smooth, even wear is normal, while grooves, galling or a loose fit at the side plate point to parts that need attention. Look over the pins after rough trail use and after any hard season of off-road driving.
- Check for play at the side plate
- Look for grooves or galling on the pin surface
- Regrease after water crossings
- Tighten fasteners to the torque range in your vehicle’s service manual
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEGS1 |
| UPC | 881348005946 |
| Position | Rear |
| Grease outlets | Two per pin |
| Fit type | Direct fit |
Vehicle fitment
Confirm fit against your vehicle’s year, model and trim before buying, since the rear shackle match depends on the exact vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The assembly is bolt-together, with no drilling or welding needed. Keep the grease outlets reachable after assembly so the pins can be serviced.
What’s included
It is a rear shackle and pin set. Look over the included parts against your installation before starting.






