Overview
The ARB Old Man Emu Nitrocharger Sport Rear Shock, part number 60161, is a rear monotube shock for the Jeep Wrangler JL. It fits 2018–2026 Wrangler JL models in 2-door and Unlimited 4-door form, across the Willys, Sport, Rubicon, Sahara, Moab and anniversary trims.
The shock uses eyelet mounts at both ends and a 35 mm body. It is part of the Nitrocharger Sport range.
ARB designs its Old Man Emu suspension as a matched system of springs, bushings, U-bolts, center bolts, spring liners, trim packers and fitting kits, chosen for comfort, load carrying and control. This rear shock uses a monotube design with a single tube for gas and oil. The eyelet pins at both ends should be checked against the mounts on your JL before ordering.
Because this rear shock is one part of a matched setup, plan the rear with the springs and bushings from the same range. After installation, check the rear mounts and confirm that the shock moves freely through its full travel.
Key features
- Rear position for the Jeep Wrangler JL
- Monotube design
- Eyelet top and bottom mounts
- Gas-charged, 35 mm body
Rear shock setup
The rear shocks control the axle’s movement under load and over bumps, so they influence both comfort on pavement and control on uneven trails. Monotube designs keep the gas and oil in one tube, which can help the damper hold steady when it heats up during longer runs. When the rear carries gear, the shock works harder, so check that the shock length suits the ride height.
Rear shocks are usually replaced along with other rear suspension parts. Worn bushings, tired springs and damaged mounts can change how the damper behaves, so inspect them while the shock is off. Check the eyelet bushings for cracking and look for oil on the body. A rear that bounces after a bump or feels loose on washboard roads may point to a worn shock.
- Inspect eyelet bushings before fitting
- Check the shock body for oil seepage
- Confirm full travel after installation
- Replace both rear shocks on the same axle
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 60161 |
| Shock series | Nitrocharger Sport |
| Location | Rear |
| Shock type | Monotube |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Body diameter | 35 mm |
| Charge | Gas charged |
Vehicle fitment
It fits 2018–2026 Jeep Wrangler JL models in 2-door and Unlimited 4-door form, across the Willys, Sport, Rubicon, Sahara, Moab, Freedom, Islander, High Altitude and anniversary trims.
Wrangler JK and earlier models are not in the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Sold individually, so order one rear shock per position. Confirm the mounting parts you need before starting.








