Overview
The ARB CS019R is a leaf spring from ARB 4×4 Accessories, part number CS019R, and it is a direct fit for the 1969–1974 Toyota Hi-Lux Base. Its two-stage leaf pack has a primary stage that supports the unladen truck and a secondary stage that adds capacity as the load increases.
The leaves are draw tapered and diamond cut, graphite coated to lower friction, and shot peened on the tension side to reduce stress. Each spring is fully scragged and load tested, and regreasable nylon interleaf liners sit at the leaf tips where the load is greatest.
The 1969–1974 range is an older Hi-Lux generation. Older trucks often need a careful check of the spring eyes and mounting hardware before the new spring goes in, since the original parts may be worn or modified.
The two-stage design in this spring is set up so the unladen ride stays close to a normal truck’s, with the secondary leaves only taking load as the spring deflects further. The diamond cut leaf ends and the graphite coating help the leaves move smoothly against each other through that range.
Key features
- Two-stage leaf pack for a comfortable ride and added support.
- Draw tapered and diamond cut leaves spread the load evenly.
- Scragged so the spring holds a permanent set.
- Load tested against the specification.
- Graphite coating reduces leaf-to-leaf friction.
- Regreasable nylon interleaf liners.
- Shot peening of the tension side.
Working with older trucks
Older trucks carry a different set of wear points than newer ones. Spring eyes, bushings and shackle pins can be worn or enlarged after years of use, and a new spring will not sit correctly on worn mounts. Clean and measure the mounting points before fitting, and replace any bushing that feels loose.
Two-stage packs suit a truck that runs mostly unladen but still needs support when loaded. The secondary leaves engage only as the spring deflects further, so ride height and feel change with payload. Shot peened leaves and graphite coating help the leaves last through repeated flex.
- Inspect spring eyes for cracks
- Replace worn shackle pins and bushings
- Check that the spring side matches the original
- Retorque U-bolts after the first drives
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS019R |
| UPC | 700003408931 |
| Type | Leaf spring |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
Vehicle fitment
It fits the 1969–1974 Toyota Hi-Lux Base.
Hi-Lux years outside 1969–1974 and other Toyota models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One leaf spring. Confirm the hardware you need against your installation before starting.



