Overview
The ARB CS009FB is a heavy duty front leaf spring with a 2 inch lift for the 1984–2014 Toyota 4Runner in Base, DLX, Limited, SR5, Sport and Trail trims. It is sold each, with a lift height range of 0 to 4.99 inches.
The leaves are tapered and diamond cut, which spreads the load over a larger surface and reduces stress at the leaf ends. The pack is fully scragged and load tested, so it takes a permanent set that reduces sagging. The tension side of every leaf is shot peened, which can extend spring life.
The axle seat is flat, which supports a positive, secure axle mount and reduces spring stress. A military wrap is fitted, and the nylon interleaf liners at the leaf tips are regreasable for servicing the friction points. The leaf pack is two-stage. Because the spring is sold each, a pair needs two springs.
Key features
- 2 inch front lift spring
- Tapered and diamond cut leaves
- Fully scragged and load tested
- Shot peened tension side
- Military wrap for added safety
- Graphite coating to reduce friction
- Anti-friction pads and anti-squeak clamp liners
- Flat axle seat area for a positive mount
- Two-stage leaf pack
Leaf spring care and inspection
A front leaf spring carries much of the vehicle’s weight and works against the axle, so its leaves and liners wear over time. A tapered, diamond cut pack spreads load across more of the leaf, which reduces stress at the ends. Regular inspection helps catch sag, cracks and worn liners before they affect alignment or handling.
Grease the regreasable liners at service intervals and keep the friction points clean. Anti-friction pads and clamp liners reduce squeak, but they wear and should be replaced when they become loose or noisy. When a spring is replaced, the bushings and clamp hardware are often replaced at the same time.
- Inspect leaves for cracks at the tips
- Regrease liners at service
- Replace worn pads and clamp liners
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS009FB |
| Position | Front |
| Lift amount | 2 inch |
| Lift height range | 0 to 4.99 inches |
| Spring quantity | Single spring, sold each |
| Bushings | Not included |
| Wrap | Military wrap |
| Finish | Graphite coated |
| Fitment type | Direct fit |
Vehicle fitment
Fits the 1984–2014 Toyota 4Runner in Base, DLX, Limited, SR5, Sport and Trail trims. Confirm fit for your vehicle’s year, model and trim before ordering.
The list does not include the 2015 and later 4Runner, the Land Cruiser or the Tacoma. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 2 inch front spring changes the front ride height and the alignment, so check the alignment and caster after installation. Because the bushings are not included, have them ready before the spring is fitted.
What’s included
One spring, sold each. Bushings are not included, so have them ready before fitting the spring.




