Overview
The ARB CS012FA is a left-side leaf spring from ARB 4×4 Accessories, part number CS012FA. It is a direct fit for the 1986–1993 Suzuki Samurai. The two-stage leaf pack carries the vehicle unladen on its primary stage and adds the secondary stage under heavier loads.
ARB builds the leaves as draw tapered and diamond cut, and the leaves are graphite coated for lower friction. The tension side of each leaf is shot peened to reduce stress, and nylon interleaf liners sit at the leaf tips. The spring is fully scragged and load tested, so it holds its set in service.
The left-side spring with a two-stage pack is made for the Samurai years and trims named in its fitment, so those years and trims are the closest match for its design.
The graphite coating between the leaves and the nylon interleaf liners at the tips work together to lower friction as the spring moves. In a two-stage spring that friction is shared between both stages, so the coating and liners help keep the ride consistent when the secondary leaves engage.
Key features
- Left-side spring, a part for the Samurai’s left side.
- Diamond cut and draw tapered leaves for an even load path.
- Scragged and load tested for a permanent set and verified capacity.
- Graphite coated leaves reduce friction between them.
- Regreasable nylon anti-friction pads.
- Flat axle seat area for a positive axle mount.
- Shot peened tension side of all leaves.
Caring for a Samurai spring
The Suzuki Samurai’s rear springs work hard on rough tracks and steep climbs. A two-stage pack helps the ride stay tidy when the truck is light and adds support when a spare tire, gear or passengers are added. Because the Samurai is often driven off road, the leaves see grit, water and mud, which makes routine care more important. Paying attention early keeps the spring predictable for years.
Pay attention to the leaf tips and the interleaf pads, since they move the most during flex. Grease the regreasable nylon liners on schedule, and clean mud from the pack after trail runs so grit does not accelerate wear between the leaves. Check the axle seat and clamp hardware after the first few drives on a new spring, because the parts settle. Keep a short record of service dates for the spring.
- Clean mud and grit from the pack after trail use
- Grease nylon pads on a regular schedule
- Recheck axle clamp hardware after the first drives
- Inspect shackles and bushings when the spring is removed
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS012FA |
| UPC | 9332018022646 |
| Side | Left |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
Vehicle fitment
It is a direct fit for the 1986–1993 Suzuki Samurai (Base, JA, JL, JS, JX and JX SE). Confirm your vehicle’s year, model and trim before ordering.
Samurai years outside 1986–1993 and the Suzuki Sidekick and Vitara are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One left-side leaf spring. Check the package contents against your installation before starting.



