Overview
The ARB CS002F is a heavy-load leaf spring from ARB 4×4 Accessories, part number CS002F, sized for a 1.25 inch lift. ARB names the Toyota FJ40 Series as the application without giving model years, so confirm the year and model before ordering.
The spring uses a two-stage leaf pack, with the primary stage carrying the vehicle unladen and the secondary stage adding support under load. ARB builds it with diamond cut, draw tapered leaves and shot peened tension sides, and the leaves carry a graphite coating to reduce friction between them.
A lift rating matters because the spring height sets the ride height and the geometry of the axle. The 1.25 inch figure is the one ARB gives for this spring, so it should be compared with the lift already on the vehicle or the lift planned for it. Heavy-load springs stiffen the rear of a vehicle, so the lift and load rating should be read together.
Key features
- Heavy-load rating for added support when the vehicle carries weight.
- 1.25 inch lift rating for the spring height.
- Draw tapered and diamond cut leaves reduce stress at the leaf ends.
- Fully scragged and load tested, so the spring holds its set and meets the specification.
- Nylon interleaf liners at the leaf tips, regreasable for lower friction.
- Shot peening on the tension side of all leaves.
- Graphite coated leaves for lower friction between the leaves.
Lift and load matching
Spring height sets ride height and the geometry of the axle, so a lift rating should be compared with the suspension already on the truck. A heavy-load spring stiffens the rear when the vehicle carries weight, which makes the lift and load rating work together. Choosing a spring that matches the planned lift reduces the chance of axle angle problems and uneven tire wear.
When a lift changes, related parts often need attention too. Shock length, bump stops and the track bar position all depend on the spring height. Inspect the U-bolts and shackles after the first few drives, since new springs can settle as the leaves take their set.
- Match the lift rating to the planned suspension height
- Check shock length and bump stops after a lift
- Re-torque U-bolts after the first few drives
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS002F |
| UPC | 9332018023674 |
| Lift | 1.25 in. |
| Load rating | Heavy load |
| Application | Toyota FJ40 Series |
| Leaf pack | Two-stage |
Vehicle fitment
It fits the Toyota FJ40 Series. Confirm fit for your vehicle’s year, model and trim before ordering.
This part is for the Toyota FJ40 Series. Confirm your vehicle’s year, model and trim before fitting it to another Land Cruiser generation or the FJ60.
What’s included
One leaf spring. Check the package contents against your installation before starting.


