Overview
The ARB CS002R is a heavy-load leaf spring from ARB 4×4 Accessories, part number CS002R, for a 2.5 inch lift. ARB names the Toyota FJ40 and FJ60 Series as the applications. No model years are given, so confirm the year and model before ordering.
The two-stage leaf pack carries the vehicle unladen on its primary leaves and adds the secondary stage when the load goes up. ARB uses diamond cut, draw tapered leaves, shot peened tension sides and a flat axle seat on this spring, and the leaves are graphite coated to lower friction.
A 2.5 inch lift is a larger height change than the lower-lift version in the same family, so the spring is for a truck that has been raised further. The lift rating sets the ride height the spring is made to hold, and the heavy-load rating sets how much weight the leaves can take before the secondary stage works hard.
Because the CS002R sits at the higher end of this lift range, the geometry of the leaves and the eye layout are the main things to check against the axle and frame of the vehicle. Heavy-load springs of this kind also change how the suspension rides when the truck is empty, so the unladen ride should be judged after installation rather than assumed from the rating alone.
Key features
- Heavy-load design for added support when the vehicle carries weight.
- 2.5 inch lift rating for the spring height.
- Diamond cut and draw tapered leaves reduce leaf-end stress and protect against breakage.
- Scragged and load tested, so the spring takes a permanent set and meets its specification.
- Graphite coating and regreasable nylon pads reduce friction at the leaves.
- Flat axle seat area for a positive, safe axle mount.
- Shot peened tension side of each leaf.
Matching lift and load
Lift height changes the angle of the leaves and the position of the axle, so a spring meant for a higher lift can alter ride height if fitted to a truck with less lift. Heavy-load springs also change how an empty truck rides. Judge the unladen ride after installation and adjust bump stops or shock length if the stance looks wrong.
When a spring is replaced, check the shackles, bushings, U-bolts and axle seat for wear, since those parts carry the new load path. Confirm the driveshaft angle and brake line length after raising the axle, as a higher lift often needs them checked. Retorque the U-bolts after the first few drives.
- Inspect shackles and bushings before fitting
- Check driveshaft angles and brake line length
- Retorque U-bolts after the first few drives
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS002R |
| UPC | 70000408257 |
| Lift | 2.5 in. |
| Load rating | Heavy load |
| Application | Toyota FJ40/60 Series |
| Leaf pack | Two-stage |
Vehicle fitment
The CS002R is made for the Toyota FJ40 and FJ60 Series. Confirm your vehicle’s year and model before ordering.
What’s included
One leaf spring. Confirm the hardware you need before starting the installation.


