Overview
The ARB RD218 is an electronic push-button selectable locker from Eaton, known as the E-Locker, with 31 axle splines. Confirm the type and spline count against your axle before fitting.
The locker shifts between open and spool with a button press, needs no air lines, and runs on 12 Volt power alone.
Key features
- Electronic push button selection between open and spool
- No air lines to leak and no cables to get hung up
- Requires 12 Volt power
- Selectable locker differential type
- 31 spline axle spline count
Choosing a switch and wiring
Electronic lockers work well when the control is easy to read and the wiring is tidy. A dash switch with a clear engagement light lets the driver confirm the state before a climb, while a poorly placed switch can lead to guessing. Keep the switch within easy reach, and mount it so it does not catch a knee or a shifter.
Plan the wire run before pulling trim, and keep the harness away from heat sources, sharp edges and moving suspension parts. Protect each connection from water and road grit, and check the splices after the first few trail trips. Pairing a locker with a good battery and a sound charging system helps keep the power steady on long days in the dirt.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD218 |
| UPC | 9332018027337 |
| Axle manufacturer | Other |
| Axle spline | 31 splines |
| Differential type | Selectable locker |
| Actuation | Electronic push button |
| Power | 12 Volt |
| Fitment field | Universal Fit |
Vehicle fitment
No model years or chassis codes are confirmed for this locker, so match it to your axle type and its 31 spline count before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The locker runs on 12 Volt power, so plan the wiring and a switch before installation. Have a qualified installer route the power supply and confirm the 31 spline count against the axle.
What’s included
Plan the wiring and a switch before installation. Have a qualified installer route the 12 Volt supply and confirm the 31 spline count against the axle.
Not included: Review the 12 Volt power supply and any switch or wiring against your install plan before you start.








