Overview
The ARB RD181 is a rear air locking differential for the Nissan R180A 10 bolt axle, with 27 splines and 3.54 down gearing. Selectable air locking turns an open differential into a full spool so both wheels share power. No vehicle years or models are named, so the R180A axle and spline count are the matching details.
The R180A is a Nissan axle, and this unit is made for the 10 bolt cover and 27 spline count. Confirm both on your axle before installing the RD181, since they determine fit.
Key features
- Air activated selectable locker
- Full spool action for both wheels
- Built for 27 spline axles
- Listed gearing: 3.54 down
- Nissan R180A axle type
- Rear axle location
Working on a 10 bolt rear
The 10 bolt rear is a compact carrier, so working inside it takes patience. The cover is smaller than many heavy-duty housings, and the carrier must come out through it for the locker swap. Clean the mating surfaces thoroughly and replace the gasket rather than reusing the old one, since a poor seal lets gear oil seep out over time.
An air locker on this axle adds a lock to a rear that was open before. Check the axle shafts, bearings and seals while the cover is off, because the locked axle transmits more load through those parts. Keep a written record of the gear ratio and spline count for future service, so a replacement carrier or gear set can be matched without guesswork.
- Check axle shaft bearings and seals while the cover is off
- Replace the cover gasket during the install
- Keep a written record of the gear ratio and spline count
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD181 |
| UPC | 9332018003348 |
| Differential type | Selectable air locker |
| Axle manufacturer | Other |
| Axle type | Nissan R180A 10 bolt |
| Axle spline count | 27 splines |
| Gear ratio | 3.54 down |
| Axle location | Rear |
Vehicle fitment
The RD181 is matched to the R180A 10 bolt axle, 27 spline count and 3.54 down gearing. Confirm fit for your vehicle’s year, model and trim before ordering.
Axles with other spline counts or gear ratios are outside these specifications, and a different axle family will need a different locker. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An onboard air compressor and its air supply must be arranged before the locker can engage. Differential swaps on a 10 bolt Nissan axle need carrier and gear setup by someone experienced with that axle.
What’s included
Included: the RD181 air locking differential.
Not included: The ARB onboard air compressor needed to activate the locker.







