Overview
The ARB RD104 is a front air locking differential for Dana 30 axles, with 30 splines and a 3.73 ratio up gear set. Air pressure locks the differential so both front wheels turn together, which gives full spool traction when one wheel slips.
Operation depends on an ARB onboard air compressor, which is sold separately. Match the axle to the listed Dana 30 types before ordering, because the fitment field reads Universal Fit even though this is an axle-specific part.
Key features
- Pneumatic selectable locker that converts an open differential to a full spool
- Designed for the Dana 30 front axle with 30 splines
- Uses a 3.73 ratio up gear set
- Air-activated engagement that needs an ARB onboard compressor
Front axle install planning
A front locker changes how the front wheels share drive, so the install should be planned as a full front-end job rather than a quick swap. The carrier comes out for gear setup, and the axle shafts and hubs are often inspected at the same time. Scheduling the driveline work with the air supply already planned saves time.
Front lockers also affect steering feel when engaged. Expect the front end to pull less freely in tight turns on pavement, and disengage the lock for everyday driving. Test the lock in an open area before taking the vehicle onto rough trails.
- Plan the air supply before the carrier comes out
- Ask the shop to check the pinion seal and carrier bearings
- Test engagement in an open area before trail use
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD104 |
| UPC | 837290004278 |
| Axle manufacturer | Dana |
| Axle location | Front |
| Axle types | Dana 30 JK, Dana 30 Standard, Dana 30 Reverse, Dana 30 TJ, Dana 30A KJ |
| Axle spline | 30 splines |
| Gear ratio | 3.73 ratio up |
| Differential type | Selectable locker |
Vehicle fitment
No year, make or model is given for this part. Fit depends on the axle: the axle types are Dana 30 JK, Dana 30 Standard, Dana 30 Reverse, Dana 30 TJ and Dana 30A KJ, each with 30 splines.
Dana 35 and other axles are not covered by this part.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the air supply before installation, because the locker will not engage without an ARB onboard compressor. Have a driveline shop install the unit and set the gears, since a front differential swap involves carrier work and gear setup.
What’s included
Check the package contents against your installation before starting.
Not included: ARB onboard air compressor, sold separately.








