Select your vehicle

ARB Dana 60 32 Spline 4.56 Up Air Locking Differential – RD164

ARB 4x4 Accessories

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • ARB RD164 Dana 60 air locking differential, 32 spline
  • Selectable air locker converts an open differential to full spool
  • Listed gearing: 4.56 up
  • Requires an ARB onboard air compressor, not included
  • Part number RD164, UPC 9332018003263

Description

Overview

The ARB RD164 is a Dana 60 air locking differential with 32 splines and 4.56 up gearing. Its selectable air locker makes the axle act as a full spool, so both wheels receive power when traction drops on one side. No vehicles are named for this part, so the fitment section explains how to check your axle before installing it.

Air from an onboard compressor engages the lock, which is what makes this a selectable design rather than a fixed locker. Drivers comparing the 32 spline RD164 with the 30 spline RD163 or the 35 spline RD166 should match spline count and gear ratio to the axle they already have.

Key features

  • Air operated selectable locker
  • Full spool action powers both wheels together
  • Built for 32 spline axles
  • Listed with 4.56 up gearing
  • Mounts in rear or front axle positions
  • Needs an ARB onboard air compressor to activate

Matching spline count and gearing

Matching a locker starts with two measurements: the spline count on the axle shafts and the gear ratio in the carrier. A locker with the wrong spline count will not seat on the shafts, and a gearing mismatch can leave the unit working against the drivetrain. Count the splines carefully and confirm the gear ratio from the carrier tag or the axle identification before buying.

Once count and ratio match, think about how the vehicle will be driven. Lockers suit rock, mud and steep climbs, but on highway use a locked axle can make steering and cornering unpredictable. Many owners plan to release the lock whenever traction is good.

  • Confirm spline count with a measuring tool
  • Check the carrier ring gear ratio
  • Plan for a full carrier rebuild if shims are worn
  • Keep retaining hardware if it is reusable

Specifications

Brand ARB 4×4 Accessories
Part number RD164
UPC 9332018003263
Differential type Selectable air locker
Axle manufacturer Dana
Axle type Dana 60
Axle spline count 32 splines
Gear ratio 4.56 up
Axle location Rear|Front

Vehicle fitment

Compatibility comes down to the Dana 60 housing, 32 spline shafts and 4.56 up gearing, so check your existing axle against those before choosing it.

Lockers with a different spline count or gear ratio are separate parts. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The air supply is the main setup item: plan the compressor, its air plumbing and a switch before carrier work begins. Gear and carrier setup after a differential swap is specialist work, so use a shop with axle experience. Lift the vehicle on stands rather than a jack alone.

What’s included

Included: the RD164 air locking differential.

Not included: ARB onboard air compressor, which is required to activate the locker.

SKU: ARBRD164 Category:

Specification

Shipping weight 45.00 lbs
Package dimensions 11.00 × 10.60 × 10.60 in
brands

Questions & Answers

Is the ARB RD164 a 32 spline Dana 60 differential?

Yes. The RD164 is a Dana 60 axle type with 32 splines and 4.56 up gearing. Check your axle housing and spline count against these details before installing.

Does the RD164 work without an air compressor?

No. The air compressor is required to activate the air locker, and it is not included with the differential. An ARB onboard compressor must be set up to engage the lock.

Which vehicles fit the RD164?

Fitment is set by the axle rather than a named vehicle. Use the Dana 60 axle type, 32 spline count and 4.56 up gearing as your matching details, and confirm them against your axle before ordering.

Can a 32 spline locker go in a 30 spline axle?

No. The spline count has to match the axle shafts for the locker to seat and transfer torque. Measure the existing shafts first, and choose a locker that matches your spline count and gear ratio before ordering.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon