Overview
The ARB RD212 is a rear air locking differential for the Mitsubishi 9 Inch axle, as the axle type is listed. It is a selectable air locker that locks both axles so the differential acts as a full spool, sending drive to both wheels on hard terrain.
The locker sends full drive to both wheels when engaged, because both axle shafts turn together. An ARB onboard air compressor is needed to activate it. Count your axle splines before fitting, since the spline count must match the axle exactly.
Key features
- Air locking action on both axles
- Converts an open differential to a full spool type axle
- Selectable locker differential type
- Rear axle location with a Mitsubishi 9 Inch axle type
- Air activation through an ARB onboard air compressor
Choosing a locker setup
A locker changes how torque reaches the wheels, so the setup around it matters as much as the unit itself. With both axle shafts locked, the wheel with the most grip receives drive, which helps on steep climbs and loose surfaces. Air lockers are engaged on demand, so drivers usually use them when traction falls off and disengage them on smooth pavement, where full locking can make turning stiff.
Before buying, match the locker to the axle housing, carrier and gear ratio already in the vehicle, and plan for the air supply as part of the build. Related parts are often replaced at the same time, including ring and pinion gears, axle bearings and seals, since opening the axle is the costly part of the job. Inspect the air hoses and fittings periodically for cracks or damage, and keep the compressor intake clear of dust.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD212 |
| UPC | 70000645952 |
| Axle location | Rear |
| Axle type | Mitsubishi 9 Inches |
| Axle manufacturer | Other |
| Axle spline (listed field) | 34 splines |
| Spline count (title) | 28 splines |
| Differential type | Selectable locker |
| Activation | Air, from an ARB onboard air compressor |
Vehicle fitment
No model years or chassis codes are listed, so no vehicle year is confirmed. The axle type is given as Mitsubishi 9 Inches, and the fitment field reads Universal Fit. Because the title and spec field disagree on spline count, measure your axle before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the spline count first, because a locker that does not match the axle splines will not work. Use a shop experienced with 9 inch axle lockers, and route the air line before the axle is reassembled.
What’s included
The differential is the only item covered here, with no packaged accessories.
Not included: ARB onboard air compressor, sold separately.








