Overview
The ARB RD103 is a rear Dana 35 air locking differential with 27 splines, listed with a 3.31 ratio down gear setup. Air pressure locks both axles, giving full-spool drive when engaged.
It is built for the rear Dana 35 position only. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Rear axle location
- 27-spline axle design
- Air-operated selectable locker
- Full-spool function when locked
Care and inspection
A rear air locker works hard on each engagement, so routine inspection matters. Check the axle housing cover, pinion seal and axle seals for leaks after trail use. Oil that smells burnt or carries metal flecks may point to gear or bearing wear that should be looked at before the next run.
Air lines are the most common point of trouble on an air-operated locker. Keep them secured away from heat, moving parts and rock contact, and inspect the fittings each time the vehicle is serviced. A small leak can keep the lock from engaging even when the locker itself is sound.
- Inspect the axle cover gasket for weeping oil
- Check air lines for chafing and loose clamps
- Look for metal flecks in the gear oil
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD103 |
| UPC | 837290004261 |
| Axle manufacturer | Dana |
| Axle type | Dana 35 |
| Axle location | Rear |
| Axle spline | 27 splines |
| Differential type | Selectable locker |
| Gear ratio | 3.31 ratio down |
Vehicle fitment
It is a rear Dana 35 unit. Confirm the axle type, spline count and gear ratio before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear setup and air line routing are specific to this locker, so have a qualified shop handle the install. Confirm your existing gears support the 3.31 ratio before fitting.
What’s included
The rear air locking differential unit.
Not included: any air compressor, which is sold as separate equipment.







