Overview
The ARB CS003F is a multi-leaf spring from ARB 4×4 Accessories, part number CS003F. Its two-stage pack uses primary leaves for the unladen ride and secondary leaves that join when a heavy load is carried. Confirm fit for your truck before ordering.
The leaves are diamond cut and draw tapered to spread the load over a larger surface. Graphite coating and nylon interleaf liners reduce friction between the leaves, and the tension side of each leaf is shot peened to lower stress. A military wrap on the eye adds reinforcement.
A multi-leaf spring works by letting the leaves flex against one another, so their finish and lubrication shape both comfort and service life. The F suffix is part of the part number, so compare the new spring with the one being replaced before fitting.
Diamond cut ends and draw tapered leaves give the spring a smoother change in stiffness along its length. That matters on a truck that goes from unladen to loaded, because the leaves share the load more evenly instead of concentrating it at one end. The military wrap on the eye adds a further reinforcement at the point where the spring meets the axle hardware.
Key features
- Diamond cut, draw tapered leaves spread the load progressively along the spring.
- Scragging gives a permanent set to reduce sagging, and each spring is load tested.
- Graphite coating on the leaves reduces friction between them.
- Regreasable nylon interleaf liners sit at the leaf tips.
- Military wrap on the spring eye for added safety.
- Flat axle seat area for a positive axle mount.
- Shot peening on the tension side of all leaves.
Two-stage spring trade-offs
A two-stage leaf pack trades a little stiffness when empty for extra support when loaded. The primary leaves keep the ride composed on a light truck, while the secondary leaves take over as the rear end settles. That is useful for a truck that tows, hauls gear or carries a camper, but it also means the spring should be judged both empty and loaded.
Multi-leaf springs need periodic attention. Regreasable liners should be serviced so the leaves can slide, and the shackles, eye bushings and U-bolts should be checked for play. Look at the leaf tips and the military wrap for cracks or rust. If the leaves rub or squeak after fitting, the liners and friction pads are the first things to inspect.
- Grease the interleaf liners at service intervals
- Check the leaf tips for cracks or rust
- Inspect shackles and eye bushings for play
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS003F |
| UPC | 9332018022400 |
| Type | Leaf spring |
| Leaf pack | Two-stage |
| Leaf ends | Diamond cut, draw tapered |
Vehicle fitment
Confirm fit for your truck’s year, model and trim before ordering, and check the axle type and mounting points as well.
What’s included
One leaf spring. Check the hardware you have against the spring before starting work.


