Overview
The Alloy USA 11650 is a transfer case chain for NP231 and NP233 transfer cases. It is 1 inch wide and has 31 links.
No vehicle year, make or model is named with the chain. Match your transfer case type to NP231 or NP233 before ordering.
Key features
- Fits NP231 and NP233 transfer cases
- 1 inch wide
- 31 links
Chain wear and replacement
A transfer case chain carries drive from the input to the front and rear output shafts. As it stretches or the rollers and pins wear, it can produce a whine, rattle or vibration that changes with speed. Chain condition matters because a loose or damaged chain can affect how the transfer case engages.
Chains and sprockets wear together, so inspect the sprockets for hooked or polished teeth when the chain is off. Replacing a chain onto worn sprockets can shorten the life of the new chain. Check that the chain runs freely through its full travel and that no link binds.
Plan the job with the transfer case fluid and gasket in mind. Drain the fluid, clean the housing and use fresh gaskets on reassembly so the case seals properly after the chain is in place.
- Check sprocket teeth for hooks or polish
- Look for stiff or binding links
- Use fresh gaskets on reassembly
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 11650 |
| UPC | 804314233174 |
| Width | 1 inch |
| Links | 31 |
| Compatible transfer cases | NP231 and NP233 |
Vehicle fitment
Fitment is given by transfer case only: NP231 and NP233. No vehicle years or models are named, so fitment is not confirmed for any specific vehicle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the package contents against your installation before starting.








