Overview
The Alloy USA Dana 30 Locking Hub Conversion Kit, part number 12194, replaces non-serviceable wheel hubs on a Dana 30 axle with lockable hubs. Locking the front hubs can reduce driveline strain and may help fuel economy on pavement, and it prepares the vehicle for trail use.
The hub conversion keeps the factory wheel bolt pattern and uses serviceable wheel bearings, so the hub assembly can be serviced rather than replaced as a sealed unit. The stub axle is listed at stock size.
Key features
- Replaces non-serviceable wheel hubs with lockable hubs
- Serviceable wheel bearings
- Retains the factory wheel bolt pattern
- Stub axle listed at stock size
Locking hubs and daily driving
Locking hubs disconnect the front wheels from the axle shafts when unlocked, so the front driveline does not turn with the wheels on pavement. Keeping them unlocked on pavement reduces wear on front axle parts that spin only when engaged. Lock them before off-road driving, and unlock them again before returning to paved roads.
Hub service is a periodic task on any locking hub. Grease the bearings at the interval your maintenance schedule calls for. Inspect the seals and check for play in the hub when the vehicle is lifted. Keep the hub clean and dry, and replace worn seals promptly to keep grit out of the bearings. Torque and bearing preload should be set carefully during reassembly, following the procedure in a service manual. Reinstall the hub cap and check the lock action before a trail run.
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 12194 |
| UPC | 804314230180 |
| Axle type | Dana 30 |
| Wheel bearings | Serviceable |
| Stub axle | Stock size |
| Wheel bolt pattern | Retains factory bolt pattern |
Vehicle fitment
It fits the Dana 30 axle, and fitment is not tied to a specific year, make or model. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit replaces the factory hub assembly, it is a front axle job involving hub and bearing work rather than a simple bolt-on. Raise and support the vehicle on stands before working on the axle.
What’s included
The kit is a hub conversion. Check the package contents against your installation before starting, and plan the tools needed for hub and bearing work.












