Overview
The Dynatrac Dodge Dana 60 Free Spin Kit, part number CR60-3X1104-B, is a heavy-duty hub conversion for Dana 60 axles on Dodge Ram 4×4 trucks. Dynatrac built it to address a weak link in those trucks by replacing the factory unit bearings with fixed spindles.
The fixed spindles add strength and support smoother running. The kit keeps the factory wheel bolt pattern, uses serviceable wheel bearings and has a stub axle larger than stock.
Key features
- Heavy-duty fixed spindles in place of factory unit bearings
- Serviceable wheel bearings
- Stub axle larger than stock
- Retains the factory wheel bolt pattern
Choosing the right setup
A Dana 60 hub conversion sits between the axle shaft and the wheel, so the spindle, bearings and hub must work together. A larger stub axle changes the fit of the bearing and hub, and matching these parts matters for a safe, reliable front end. Check the hub and axle components before you choose a setup.
Owners who drive Dodge Ram 4×4 trucks often change the front hubs when they change tires or lift the truck. Serviceable bearings make later service simpler, and keeping the factory bolt pattern means the wheels still fit. Keep the axle shafts and hubs inspected at each service interval.
- Match spindle and bearing parts as a set
- Check tire clearance after the change
- Inspect hubs during regular front end service
Specifications
| Brand | Dynatrac |
|---|---|
| Part number | CR60-3X1104-B |
| UPC | 70000438549 |
| Axle type | Dana 60 |
| Bearing design | Fixed spindle replacing factory unit bearings |
| Wheel bearings | Serviceable |
| Stub axle | Larger than stock |
| Wheel bolt pattern | Retains factory bolt pattern |
Vehicle fitment
This kit is for Dodge Ram 4×4 trucks with a Dana 60 axle. Confirm the year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Swapping unit bearings for fixed spindles is a hub and axle job, not a simple bolt-on. Raise and support the truck safely before removing any hub or axle component.
What’s included
Check hardware, tools and any additional axle components against your installation before starting.









