Overview
The TeraFlex SlimLock Dana 60 hub kit, part number 3449350, is a 35 spline locking hub conversion for Dana 60 front axles. It is for the 2011 and 2014 Jeep Wrangler JK in Rubicon and Sport trims, and it covers 2-door and 4-door models.
A manual locking hub kit lets the driver lock the front wheels to the axle shafts for four-wheel drive and unlock them for normal driving. The SlimLock 35 spline kit is built for extreme conditions and abuse, and it is designed for Dana 60 35 spline applications.
That makes it a match for Wrangler owners who run a Dana 60 front axle with 35 spline shafts and want a hub designed for that axle’s load.
This is a conversion, so it suits Wranglers being built with a heavier front axle rather than stock replacement. Stainless steel, chromoly and bronze are used so each wear surface has its own material.
Key features
- Polished 304 stainless steel dial that resists corrosion
- 4140 quench and tempered chromoly hub and shaft cogs
- Hardened teeth to hold precise engagement under torque load
- Bronze bushing sleeve that reduces wear between hub and driver
- Designed for Dana 60 35 spline applications
- Covers 2-door and 4-door models
Locking hub use and care
A manual locking hub connects the front wheels to the axle shafts only when engaged, so the front axle stays disconnected during normal road driving. Engaging the hub before using four-wheel drive keeps the front driveline working in low traction conditions. The hub mechanism works best when it is cycled regularly, since parts that sit still can stiffen or corrode.
When sizing up a hub conversion, confirm the axle type and spline count first, since the hub must match the shafts it drives. Check the front driveline and wheel bearings during install, and keep the hub dial clean. Inspect hub seals and gaskets at each service so that grit and water do not reach the internal parts.
- Confirm axle type and spline count before buying
- Cycle the hubs periodically
- Inspect seals and gaskets at each service
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 3449350 |
| UPC | 843885035053 |
| Part type | Manual locking hub conversion kit (SlimLock) |
| Spline count | 35 spline |
| Axle | Dana 60 |
| Dial material | Polished 304 stainless steel |
| Hub and shaft material | 4140 quench and tempered chromoly |
| Bushing | Bronze bushing sleeve |
| Body styles | 2-door and 4-door models |
| Fitment type | Direct fit |
Vehicle fitment
The 3449350 hub kit fits these vehicles:
- 2011, 2014 Jeep Wrangler (JK) (Rubicon, Sport)
It is for the 2011 and 2014 Wrangler JK in Rubicon and Sport trims. It is designed for Dana 60 axles with 35 spline shafts. Confirm your year, model and trim before ordering, and check the spline count of your axle shafts.
Installation notes
The hardware is designed around a 35 spline Dana 60, so check the spline count of your axle shafts before fitting the hubs.
What’s included
A SlimLock 35 spline hub kit. Check the package contents against your installation before starting.









