Overview
The Pro Comp Suspension U-bolt hardware kit, part number 20-65471, supplies the nuts and washers for 5/8-inch U-bolts. It is a hardware pack rather than a U-bolt, so it is used with U-bolts you already have or buy separately.
The kit contains 8 Hi-Nuts and 16 extra thick washers. The thread is 5/8-inch-18, so match it to the U-bolts on your axle or spring before installation.
Key features
- 8 Hi-Nuts
- 16 extra thick washers
- 5/8-inch thread
Torque and thread matching
Hi-Nuts are self-locking nuts with a nylon insert that resists loosening from vibration. They work well on U-bolts that are tightened after a lift, but the insert can lose grip after repeated removal. Thick washers spread the clamp load across the plate, which helps prevent the nut from pulling into softer metal.
Clamp joints on axles and springs take constant movement, so thread condition matters. Clean and inspect threads before assembly, and avoid cross-threading by starting nuts by hand. Pick up a thread chaser if rust or debris is present. Rust under the washer can cause loosening, so inspect the joint after the first few trail runs.
- Replace Hi-Nuts that spin freely by hand
- Use the thick washers on the plate side
- Check the plate for elongated holes
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 20-65471 |
| UPC | 614901126907 |
| Thread | 5/8 inch-18 |
| Hi-Nuts | 8 |
| Washers | 16 extra thick |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Match the 5/8-inch thread to the U-bolts on your axle or spring.
What’s included
Included: 8 Hi-Nuts and 16 extra thick washers.
Not included: the U-bolts themselves.







