Overview
This is a 2.5 inch gas charged monotube rear shock, part 57011BX-2, with a stem top mount and an eyelet bottom mount. It is vehicle specific ride tuned to balance on-road ride quality with off-road performance.
The 2.5 inch body is a hard-anodized, thick wall impact forging. The 17-4 PH stainless steel shaft is chrome plated for corrosion and abrasion resistance.
Key features
- 2.5 inch body diameter
- Hard-anodized, thick wall impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Monotube, gas charged
- Stem top and eyelet bottom mounts
- Vehicle specific ride tuning (VSRT)
Rear shock role and wear
The rear shocks control how the axle settles after bumps and when the bed is loaded. A monotube design routes damping oil through a single tube, which helps the shock resist fade during repeated hard use. Worn rear shocks often show up as a bouncy tail, hopping over washboard or cupped tires, so a quick check of the rear end is worthwhile before a trip.
Replacing both rear shocks at the same time keeps damping even from side to side, which helps the truck track straight. When the rear shocks are changed, look at the bushings and eyelets, since play there can mimic a worn shock. Compare the stem top and eyelet bottom mounts with the ones you already have before removing the old units.
- Check the shaft seal for oil or wetness
- Inspect eyelet bushings for play
- Replace shocks in pairs for matched damping
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 57011BX-2 |
| Shock series | PRO-VST |
| Position | Rear |
| Shock type | Monotube |
| Charge | Gas charged |
| Body diameter | 2.5 inches |
| Shaft | 17-4 PH stainless steel, chrome plated |
| Top mount | Stem top |
| Bottom mount | Eyelet |
| Fit type | Direct fit |
Vehicle fitment
It fits 2005 to 2023 Toyota Tacoma models.
The list does not cover other Toyota models such as the 4Runner. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem top and eyelet bottom mounts should be compared with the mounts on your Tacoma before ordering. Hard-anodizing also gives the body a finished appearance while reducing friction and bore wear.
The shock belongs to the PRO-VST series and uses vehicle specific ride tuning (VSRT).
What’s included
Check the package contents against your installation before starting.








