Overview
The 4 Wheel Parts Factory T-Series wheel, part number 4WP5014-7857347, is a 17 x 8.5-inch aluminum split spoke wheel in satin black. It has a 5 on 5 bolt pattern, an offset of 0, a backspacing of 4.75 and a center bore of 78.
The T-Series is a trail-focused split spoke wheel. Bolt pattern, center bore and backspacing need checking against the hub before the wheel is ordered.
The satin black finish gives the split spoke a lower-sheen look than a bronze and black version. The 5 on 5 bolt pattern, center bore and backspacing must match the hub. The 17 x 8.5-inch aluminum wheel has an offset of 0, and its design suits rocky trails and open-country driving.
Key features
- Split spoke design
- Satin black finish
- 17-inch diameter, 8.5-inch width
- 5 on 5 bolt pattern
- Center bore of 78
Satin finish care
Satin and matte coatings hide small scratches better than gloss finishes, but they can shine in spots if buffed. Use a gentle car wash soap and a soft mitt, and avoid compounds or polishing pads, which make satin areas glossy. Dirt and tar are best removed with a solvent made for wheels, applied and rinsed off quickly.
Because the spokes trap debris, rinse the gaps after off-road runs to keep grit from scratching the finish. Check the lip and spoke edges for chips after rocky trails, and touch them up early before moisture gets under the coating. Inspect the bolt seats after the first rough outing, since trail vibration can settle the lug nuts.
- Rinse spoke gaps after off-road use
- Touch up chips before moisture spreads
- Avoid polishing compounds on satin areas
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 4WP5014-7857347 |
| Series | T-Series |
| Diameter | 17 inches |
| Width | 8.5 inches |
| Offset | 0 |
| Backspacing | 4.75 |
| Center bore | 78 |
| Bolt pattern | 5 on 5 |
| Style | Split spoke |
| Finish | Satin black |
| Construction | Aluminum |
Vehicle fitment
Before buying, measure your hub against the 5 on 5 pattern and the 78 center bore, and confirm year, model and trim.
