Overview
The 4 Wheel Parts Factory S-Series wheel, part number 4WP8018-217045, is a 20 x 10-inch aluminum mesh wheel in gloss black milled. It has an 8 on 170 bolt pattern, an offset of -24 and a backspacing of 4.5.
The S-Series 3D mesh face and milled accents suit a custom street look. Its 8 on 170 pattern must match the hub before anything else.
An 8 on 170 pattern puts eight lugs on a 170 bolt circle, so the hub must match it exactly. The -24 offset pushes the mounting face outward, and the 4.5 backspacing sets the inner lip position. Together with the 10-inch width, these figures decide how the wheel clears the fender and brakes. The aluminum construction carries the 3D mesh design, and the gloss black milled finish shows off the milled accents. Confirm the wheel’s load capacity and the tire’s load index before choosing a tire.
The 20 x 10 size and -24 offset are the figures to compare against your hub.
Key features
- 8 on 170 bolt pattern
- Offset of -24
- Backspacing of 4.5
- 3D mesh design
- Gloss black milled finish
Eight-lug fitment and load
Eight-lug patterns are less common than five- or six-lug layouts, so confirm the hub match with extra care. The bolt circle must match exactly, and the center bore should fit the hub without play. A wheel that sits even slightly off can put uneven load on the studs and lugs, so measure before buying.
Load rating depends on the tire and wheel together, so match both to the vehicle’s weight and use. Heavy use or rough trails add stress at the spoke and lip, so inspect for cracks after hard runs. Choose a tire with a matching load index and confirm the wheel’s load capacity before loading the vehicle.
- Confirm the 8 on 170 hub match before mounting
- Check tire load index against vehicle use
- Inspect the spokes and lip after hard runs
- Re-torque lug nuts after initial drives
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 4WP8018-217045 |
| Series | S-Series |
| Diameter | 20 inches |
| Width | 10 inches |
| Offset | -24 |
| Backspacing | 4.5 |
| Bolt pattern | 8 on 170 |
| Style | 3D mesh |
| Finish | Gloss black milled |
| Construction | Aluminum |
Vehicle fitment
Before ordering, check the 8 on 170 bolt pattern against your hub and confirm the vehicle’s year and trim.
















