Overview
The Pro Comp 51 Series Rock Crawler in part number PCW51-7973F is a 17×9 steel wheel with a 5 on 5 bolt pattern, finished in gloss black. It is one of the Pro Comp Steel Wheels sizes in the 51 Series range.
It is built for a 5 on 5 hub and has a gloss black powder coat over steel. Confirm the bolt pattern, back spacing and offset against your vehicle before ordering.
Key features
- 17 inch by 9 inch steel wheel
- 5 on 5 bolt pattern
- Gloss black powder coat finish
- Available in various sizes and back spacings
Steel wheel care basics
Powder coated steel wheels hold up well to daily use, but any chip in the gloss black finish exposes bare metal that can start to rust. Touch-up paint or a clear coat designed for wheels slows that down. Wash with mild soap and water, and avoid strong solvents that can soften the coating.
After a hard impact, look for bent flanges or cracks along the bead seat, because a damaged edge may not hold tire air. Check the lug nut seats regularly as well. Steel wheels are heavy, so a second person helps when mounting one.
- Inspect the bead seat after rock strikes
- Touch up chips before rust spreads
- Re-torque lug nuts after the first drives
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-7973F |
| Series | 51 Series Rock Crawler (Xtreme) |
| Diameter | 17 in |
| Width | 9 in |
| Bolt pattern | 5 on 5 |
| Material | Steel |
| Finish | Gloss black |
Vehicle fitment
Fit depends on the bolt pattern and hub bore matching your vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The wheel only. The center cap and lug nuts are sold separately.











