Overview
The 4 Wheel Parts Factory S-Series wheel, part number 4WP8018-297050, is a 20 x 9-inch aluminum wheel with a 3D mesh design and gloss black milled finish. It has an 8 on 170 bolt pattern, an offset of 0 and a backspacing of 5.
The S-Series is a mesh street wheel with milled accents. Bolt pattern and offset need to match the hub and the vehicle before the wheel is mounted.
An 8 on 170 pattern places eight lugs on a 170 bolt circle, so the hub face has to fit that layout exactly. Offset 0 keeps the mounting face on the wheel’s centerline, and backspacing 5 sets the inner lip depth. The gloss black milled finish sits over the 3D mesh design, with milled accents that give a sharp street look. Check the load rating, weight and tire guidance against your vehicle before installation, and confirm clearance for brakes and suspension.
Key features
- 8 on 170 bolt pattern
- 3D mesh design
- Gloss black milled finish
- 20-inch diameter, 9-inch width
- Offset of 0
Before you buy
An 8 on 170 hub has only one correct layout, so the first check is the lug count and bolt circle against the hub face. Hub-centric rings may be needed when the hub is smaller than the wheel’s center bore, because they carry the load instead of the lug studs. Compare the offset with your current wheel so the new one does not move the tire outward or inward more than planned.
Gloss black finishes show scratches and brake dust more readily than darker satin coatings, so a soft wash and a non-acid cleaner keep them looking sharp. Inspect the lip and inner barrel after rough trail runs for stone chips, and watch the spokes for cracks near the hub. Replacing worn lug seats and studs at the same time keeps the new wheel seating correctly.
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 4WP8018-297050 |
| Series | S-Series |
| Diameter | 20 inches |
| Width | 9 inches |
| Offset | 0 |
| Backspacing | 5 |
| Bolt pattern | 8 on 170 |
| Style | 3D mesh |
| Finish | Gloss black milled |
| Construction | Aluminum |
Vehicle fitment
Match the 8 on 170 pattern and offset to your hub, and confirm year, model and trim before ordering.
















