4 Wheel Parts Factory S-Series Wheel, 20×9 with 6 on 5.5 Bolt Pattern – Smoke – 9218-298350

Overview

The 4 Wheel Parts Factory S-Series wheel, part number 4WP9218-298350, is a 20 x 9-inch aluminum mesh wheel in smoke. It has a 6 on 5.5 bolt pattern, an offset of 0 and a backspacing of 5.

The S-Series pairs a 3D mesh design with milled accents. Bolt pattern and offset are the measurements to match against your hubs before choosing this wheel.

A 6 on 5.5 pattern uses six lugs on a 5.5 bolt circle, a different layout from the 6 on 135 pattern in the same line. Offset 0 and backspacing 5 decide how far the 9-inch wide wheel sits in the fender. The smoke finish pairs with the 3D mesh design and milled accents. Check the bolt pattern, offset and width against your hub and clearance before fitting, and confirm the load rating and weight before mounting.

The 20 x 9 size and smoke finish are listed in its specifications.

Key features

• Smoke finish
• 3D mesh design with milled accents
• 20-inch diameter, 9-inch width
• 6 on 5.5 bolt pattern
• Offset of 0

Choosing the right setup

Offset and backspacing decide how far the wheel sits in the fender and how close it runs to brake calipers and suspension parts. A lower or higher offset changes the rubbing risk at full steering lock, so check clearance with the tire mounted before a final purchase. Wheel width also changes the tire choice, since a wider rim needs a tire whose sidewall suits that width.

Mesh designs leave more of the hub and brake area open to view, so keep those parts clean and check lug seats for corrosion during routine service. Re-torque lug nuts after the first few drives on new wheels and again after any tire service. Look over the finish around the lip for chips, because exposed aluminum can corrode there over time.

Specifications

Vehicle fitment

No vehicle is named for this wheel. Compare the 6 on 5.5 bolt pattern and the offset with your vehicle before buying.