Overview
The Fabtech Dirt Logic 2.25 rear shock absorber, part number FTS800052, is a monotube gas-charged shock for 2005–2007 and 2011–2015 Ford F-250 and F-350 Super Duty trucks. It covers a 6 – 8 in. lift range for this rear position and mounts in the OE location and other configurations.
This version has a reservoir and a stainless steel body. The Dirt Logic 2.25 line is available with or without a reservoir, so confirm the version before ordering.
Key features
- Rear monotube gas-charged design
- 2.25 large-diameter body
- Built with a reservoir
- Stainless steel body
- Built for a 6 – 8 in. lift range
Rear shock sizing for lift
Rear shocks on a Super Duty carry heavy loads, and the lift range matters for how the shock works. A shock sized for a lift range sits at a different working length than a stock unit, so the lift on your truck should be measured before installation rather than estimated.
A wide lift range also means the shock’s extension and compression need to suit the height. Rear shocks are often replaced with leaf spring and bump stop work, and worn bushings in the rear mounts can change how the shock behaves. Check those parts when the shock is changed.
- Measure rear ride height on level ground
- Inspect rear spring hangers and shackles
- Check bump stops for wear
- Plan an alignment check after lift changes
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS800052 |
| UPC | 674866094437 |
| Shock series | Dirt Logic 2.25 |
| Position | Rear |
| Design | Monotube, gas charged |
| Body material | Stainless steel |
| Reservoir | Included with reservoir |
| Lift height | 6 – 8 in. |
Vehicle fitment
It fits the 2005–2007 and 2011–2015 Ford F-250 Super Duty and F-350 Super Duty, across Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims.
Model years between those two ranges and F-450 or F-550 trucks are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift range is wide, so confirm your truck’s lift falls inside 6 – 8 in. before choosing this rear shock. A lift change can affect alignment, so have the truck checked after the swap.
What’s included
The rear shock comes with a reservoir. Check the quantity and hardware against your installation before starting.
Not included: Fabtech does not confirm mounting hardware.









