Overview
The Rugged Ridge 2-Inch Receiver Hitch, part number RUG11580.11, is a rear receiver hitch for the 2018–2026 Jeep Wrangler (JL), rated for a 3,500 lb towing capacity and a 350 lb tongue weight.
The receiver is a one-piece welded assembly designed to match the JL’s towing capacity and to work with factory equipment. Installation hardware and instructions are included.
Key features
- One-piece welded assembly for added strength
- 3,500 lb towing capacity
- 350 lb tongue weight
- Works with all factory equipment
- 2 inches by 2 inches receiver size in the rear position
- Installation hardware and instructions included
Towing limits on a JL
A rear receiver sets the limits for what you can tow or carry, so the rating on the hitch should be read alongside the vehicle’s own towing guidance. Tongue weight is often the limit that matters most on a Wrangler, because it loads the rear of the vehicle and affects steering. Keep cargo forward when possible and load carriers evenly.
After installation, check the bolts and the receiver tube at the first few stops and after rough roads. Look for loose fasteners, cracks in the welds or signs of rust. Retorque hardware that has settled and replace anything bent or damaged before towing again.
If you add a ball mount, a pin lock or a cargo carrier, match each piece to the receiver opening and its rating. A heavier mount reduces the weight you can carry on the hitch, so add up the total before loading.
- Check bolts after the first few stops
- Keep tongue weight within the rated limit
- Match ball mounts and carriers to the opening
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG11580.11 |
| Receiver size | 2 inches x 2 inches |
| Position | Rear |
| Towing capacity | 3,500 lb |
| Tongue weight | 350 lb |
| Construction | One-piece welded assembly |
| Roll pan compatibility | Not applicable |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler (JL) Rubicon, Sport and Sport S 2-door trims, and the Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S 4-door trims.
Two-door Sahara trims are not on the list. Gladiator (JT) and Wrangler JK models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation hardware and instructions are included, so follow the included instructions for the JL before towing. Keep loads within the 3,500 lb towing capacity and 350 lb tongue weight.
What’s included
All installation hardware and instructions are included with the receiver hitch assembly.
Not included: Confirm a hitch ball and ball mount are on hand before towing.










