Overview
The Omix-ADA 17206.04 is a speedometer assembly with a 0 to 90 mph scale, sold as a direct replacement for a factory Jeep gauge. It is built to original specifications and includes fuel and temperature gauges.
The assembly carries a limited five year warranty.
Key features
- 0 to 90 mph speedometer scale
- Includes fuel and temperature gauges
- Direct replacement for the factory gauge
- Built to original specifications
Speedometer drive and cable
A mechanical speedometer reads from a drive source on the transmission or transfer case, so the drive cable and gear are as important as the gauge itself. When replacing the speedometer assembly, check that the cable end fits the head and that the cable turns smoothly without binding. A stiff or kinked cable can cause erratic needle movement even when the gauge is new.
Before buying, confirm the gauge and cable match the drive type on your vehicle. Replacing a worn cable at the same time as the head is a common practice, since a worn cable can make a new gauge read low or jump. After installation, check the speedometer on a short test drive and watch for needle bounce or lag as signs the drive needs attention.
- Inspect the drive cable for kinks
- Lubricate cable ends as needed
- Check needle movement on a short test drive
- Replace worn drive gears with the cable if needed
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17206.04 |
| UPC | 804314015664 |
| Gauge type | Speedometer assembly |
| Speed range | 0 to 90 mph |
| Included gauges | Fuel and temperature |
| Warranty | Limited five year warranty |
Vehicle fitment
No year, make or model is named for this speedometer. Omix-ADA’s data marks it direct fit for Jeep, so compare the factory gauge it replaces with the Omix-ADA assembly before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The speedometer assembly with its fuel and temperature gauges.












