Overview
The MCE Fenders Gen II Flexible Fender Flare Kit (part number MCEFFTJG2-4.5) is a textured black flexible fender flare kit for 1997–2006 Jeep Wrangler TJ models. The kit covers front and rear positions with 4.5 inches of tire coverage and is designed to add 1-2 inches of extra tire clearance on the TJ.
The fenders are patented and made in the USA. Their aggressive, flat fender profile follows the original Jeep lines, so the look stays close to the factory while the tires gain room.
The Gen II design has a textured black finish with an OE-like surface. The TPO plastic is UV-stable and designed to resist sagging and cracking. The Gen III line is a separate product with glossy finishes, including a flexible carbon fiber look and a silver brushed stainless or aluminum look in the Silver Edition.
Key features
- Flexible TPO plastic that MCE says will not sag or crack
- UV-stable material for sun exposure
- Textured black finish with an OE-like surface texture
- 4.5 inches of tire coverage at the front and rear
- Adds 1-2 inches of extra tire clearance
- Patented design, made in the USA
- Lifetime warranty to the original buyer against cracking
Tire room on a TJ
Flexible flares on a Wrangler TJ are often chosen to cover bigger tires without a full lift. Extra room at the wheel opening helps, but the tire still needs clearance at full steering lock and over bumps. Check the tire width and the wheel offset before installation, since those set how much of the tire the flare covers.
Flexible plastic moves slightly as temperatures change, so the mounting points should be checked after the first few drives. Clean the flare surface with mild soap and water, then dry it before applying any protectant. Avoid harsh solvents on the textured surface, which can dull the finish over time.
- Check tire clearance at full steering lock
- Recheck mounting points after the first drives
- Use mild soap on the textured surface
Specifications
| Brand | MCE Fenders |
|---|---|
| Part number | MCEFFTJG2-4.5 |
| Style | Gen II flexible fender flare kit |
| Location | Front and rear |
| Width / coverage | 4.5 inches |
| Tire coverage options | 3, 4.5 or 6 inches (rear flares match) |
| Extra tire clearance | 1-2 inches |
| Quantity | Set of four |
| Color | Textured black |
| Material | MCE-spec TPO plastic, UV-stable |
| Made in | USA |
| Warranty | Lifetime to original buyer against cracking |
| Fitment type | Direct fit |
Vehicle fitment
The fit covers 1997–2006 Jeep Wrangler (TJ) models in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims. The same fit applies to the front and rear kit.
Wrangler YJ, LJ, JK and JL generations are not covered by these flares. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
A set of four flexible fender flares in textured black, covering the front and rear positions.
Not included: the Gen III flare line, which is a separate product.













