Overview
The Rough Country Ram Pocket Fender Flares with Rivets in black, part number R/CF-D10914, is a set of four pocket fender flares for the 2019–2022 Ram 1500. It fits Big Horn, HFE, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Rebel, Special Service, TRX and Tradesman trims.
The width coverage is 2 inches, which gives the flare a broader lip over the wheel opening. The bolt-on mount uses a few secure points with no cutting or drilling. The flares are UV treated and guaranteed free of defects for 3 years.
Key features
- Pocket fender flare styled with simulated rivets
- Sold in sets of four for front and rear wheel wells
- Listed width/coverage of 2 inches
- Bolt-on installation with no cutting or drilling
- Holds up under UV exposure and bad weather
- Ships flat black and can be painted to match
- Removable to return the truck to stock appearance
- Guaranteed free of defects for 3 years
Choosing a tire size
A 2-inch flare gives a broader lip over the wheel opening, but the tire still decides how much room there is. Compare the tire width, sidewall height and offset with the wheel opening before ordering wheels. Larger tires may need additional room, so measure the gap once the truck is fully assembled.
Finish and care follow the same logic. Flat black is ready to fit, while a body-matched color takes prep and paint before the flares are mounted. Clean the flares with mild soap, look for chipped paint at the edges, and touch up small spots early so moisture does not reach bare metal.
- Measure tire width against the wheel opening
- Paint before fitting for a body match
- Inspect edges after rough trips
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/CF-D10914 |
| Product type | Pocket fender flares with rivets |
| Quantity | Set of 4 |
| Location and position | Front and rear |
| Width/coverage | 2 inches |
| Color | Black |
| Finish | UV treated; ships flat black, paintable |
| Fitment type | Direct fit |
| Warranty | Guaranteed free of defects for 3 years |
Vehicle fitment
The manufacturer fitment list names the 2019–2022 Ram 1500 in the trims listed above, all as direct fit.
Ram 2500 and Ram 3500 trucks are not on this list, and Ram 1500 model years before 2019 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the coverage is 2 inches, check clearance to the tires at full steering lock and through suspension travel after mounting, especially with larger tires. The bolt-on mount needs no cutting or drilling. Flat black is the shipped finish, so paint before fitting if you want a body-matched color.
What’s included
Four black pocket flares with rivets, sold as one set of 4 for front and rear use.
